NETGEAR RN12P0610-100NAS - ReadyNAS 3200 RN12P0610 NAS Server Hardware Manual page 43

4. Reassemble the disk tray.
Make sure that the hard disk connectors face the interior of the disk bay when you
reassemble the disk tray.
5. Slide the disk tray back into the unit and secure the handle.
The volume automatically synchronizes with the new disk in the background. This could take
several hours depending on the disk size. You can continue to use your ReadyNAS, although
access is slower until the volume synchronization finishes. You are notified by email when the
process is complete.

To replace a disk on a 3100, 3200, or 4200:
1. In the case of a failed disk, scan disk LEDs on the disk bays to identify the failed disk.
2. Pull the disk tray release pull switch.
The tray handle pops out.
1
1. Disk tray handle
2. Disk tray release pull switch
3. Pull out the disk tray, remove the screws, remove the old disk and replace it with a new disk.
NETGEAR ReadyNAS Rack-Mount Storage Systems
Maintenance
2
43