NETGEAR RN12P0610 - ReadyNAS 3200 Software Manual page 38

ReadyNAS 3200 Software Manual
Some e-mail addresses can be tied to a mobile phone. This is a great way to monitor the device
when you are away from your desk.
Settings
This ReadyNAS 3200 device has been preconfigured with mandatory and optional alerts for
various system device warnings and failures. The Settings tab allows you to control the settings for
the optional alerts.
Figure 2-24
You should keep all alerts enabled; however, you might choose to disable an alert if you are aware
of a problem and wish to temporarily disable it.
At the bottom of the screen in the Other Alert Settings section, there are a couple of additional
options of note. Selecting the Power-off NAS when a disk fails or no longer responds option
gracefully powers off the ReadyNAS 3200 if a disk failure or a disk remove event is detected.
Selecting the Power-off NAS when disk temperature exceeds safe level gracefully powers off
the ReadyNAS 3200 when the disk temperature exceeds the nominal range.
SNMP
If you utilize an SNMP management system such as HP OpenView or CA UniCenter to monitor
devices on your network, you can set up the ReadyNAS 3200 device to work with this
infrastructure.
2-24 Managing Your ReadyNAS 3200
v1.0, June 2009