NETGEAR RN12P0610 - ReadyNAS 3200 Software Manual page 73

• Remote Rsync server. Select this if you wish to perform backups from a rsync server. Rsync
was originally available for Linux and other flavors of UNIX, but has lately become popular
under Windows and Mac for its efficient use of incremental file transfers. This is the preferred
backup method between two ReadyNAS devices. For instructions on enabling rsync, see
"Enabling Rsync and Specifying Rsync Rights" on page
Figure 4-2
• Share. Select this if you wish to back up a ReadyNAS share.
• Volume. Select this if you wish to back up an entire volume which includes all shares on it.
• USB Device. Select this if you wish to back up a USB connected drive. Choose where the
device is connected.
— Rear Top Port
— Rear Bottom Port
• All Home Shares. Select this if you wish to back up all private home shares on the
ReadyNAS.
Observe Correct Backup Source and Destination Path Syntax. Once you have selected
a backup source, you can enter the path from that source. If you selected a ReadyNAS 3200 share,
you can either leave the path blank to backup the entire share, or enter a folder path. If you selected
a remote source, each remote protocol uses a slightly different notation for the path.
Note: Depending on the operating system you are working with, observe the correct
backslash (forwarded or backward) accordingly.
Securing Your Data
3-26.
v1.0, June 2009
ReadyNAS 3200 Software Manual
4-3