Sync; Input Signal Display - Panasonic TH-50PH12L Operating Instructions Manual

SET UP for Input Signals

SYNC

Select SIGNAL from the "SET UP" menu during RGB input signal.
Press to select the "SYNC".
Press to adjust.
Setting RGB sync signal
Con¿ rm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT
signal).
AUTO: The H and V sync or synchronized signal are automatically selected.
If both input, it is selected the H and V sync.
ON G: Uses a synchronized signal on the Video G signal, which is input from
the G connector.
VBS: Uses a synchronized signal of Composite Sync input, which is input
from the HD connector.

Input signal display

Displays the frequency and the type of the current input signal.
This display is valid only for COMPONENT/RGB/PC and Digital input signal.
Display range:
Horizontal 15 - 110 kHz
Vertical 48 - 120 Hz
The dot clock frequency is displayed during digital signal input.
44
[ RGB ]
SIGNAL
SYNC AUTO
3 : 2 PULLDOWN OFF
XGA MODE AUTO
SYNC
AUTO
SYNC ON G
SYNC VBS
H-FREQ. 63.98 kHz
V-FREQ. 60.02 Hz
SIGNAL FORMAT 1280×1024/60
H-FREQ. 63.98 kHz
V-FREQ. 60.02 Hz
DOT CLOCK FREQ. 108.0 MHz
SIGNAL FORMAT 1280×1024/60