Configuring Fddi Vlans - Cisco WS-X6066-SLB-APC - Content Switching Module Software Manual

Catalyst 6000 series software configuration guide
Hide thumbs Also See for WS-X6066-SLB-APC - Content Switching Module:
Table of Contents

Advertisement

Configuring FDDI VLANs

Configuring FDDI VLANs
To create a new FDDI VLAN, perform this task in privileged mode:
Task
Step 1
Create a new FDDI or FDDI NET-type VLAN.
Step 2
Verify the VLAN configuration.
To modify the VLAN parameters on an existing FDDI VLAN, perform this task in privileged mode:
Task
Step 1
Modify an existing FDDI or FDDI NET-type
VLAN.
Step 2
Verify the VLAN configuration.
Configuring Token Ring VLANs
These sections describe the two Token Ring VLAN types that are supported on switches running VTP
version 2:
You must use VTP version 2 to configure and manage Token Ring VLANs.
Catalyst 6000 Family Software Configuration Guide—Releases 6.3 and 6.4
11-24
You can add or remove private VLAN ARP entries manually as follows:
obelix-rp(config)# no arp 11.1.3.30
IP ARP:Deleting Sticky ARP entry 11.1.3.30
obelix-rp(config)# arp 11.1.3.30 0000.5403.2356 arpa
IP ARP:Overwriting Sticky ARP entry 11.1.3.30, hw:00d0.bb09.266e by hw:0000.5403.2356
Some commands clear and recreate private VLAN mapping as follows:
obelix-rp(config)# xns routing
obelix-rp(config)#
%PV-6-PV_MSG:Purged a private vlan mapping, Primary 100, Secondary 101
%PV-6-PV_MSG:Purged a private vlan mapping, Primary 100, Secondary 102
%PV-6-PV_MSG:Purged a private vlan mapping, Primary 100, Secondary 103
%PV-6-PV_MSG:Created a private vlan mapping, Primary 100, Secondary 101
%PV-6-PV_MSG:Created a private vlan mapping, Primary 100, Secondary 102
%PV-6-PV_MSG:Created a private vlan mapping, Primary 100, Secondary 103
Understanding Token Ring TrBRF VLANs, page 11-25
Understanding Token Ring TrCRF VLANs, page 11-25
Token Ring VLAN Configuration Guidelines, page 11-27
Creating or Modifying a Token Ring TrBRF VLAN, page 11-27
Creating or Modifying a Token Ring TrCRF VLAN, page 11-28
Chapter 11
Command
set vlan vlan [name name] type {fddi | fddinet}
[said said] [mtu mtu]
show vlan [vlan]
Command
set vlan vlan [name name] [state {active |
suspend}] [said said] [mtu mtu]
show vlan [vlan]
Configuring VLANs
78-13315-02

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents