Presetting Fm/Am Stations Manually; Listening To Preset Stations; Setting The Preset Channels And Changing The Received Frequency On The Main Unit - Denon RCD-M38 Owner's Manual

n Giving station names to preset channels
Names of up to 8 characters can be input.
Tune in the preset channel you want to name.
1
2 Press [ENTER/MEMO] twice.
The display switches to the station name input display.
Input the station name.
3
Names of up to 8 characters can be input.
[u, i]
• button ....................... Selects the character.
[p]
• button ............................. Moves the cursor to the right.
[CLEAR/DEL]
• button .............. Deletes the currently selected
character.
• Characters that can be input.
A ~ Z, 0 ~ 9, ^ ' ( ) + , - . / = (space)
z
4 Press .
[ENTER/MEMO]
The characters you have input are entered.
• To give names to other stations, repeat steps 1 to 4.

Presetting FM/AM stations manually

This unit can be preset with a total of 99 FM and AM broadcast stations.
Tune in the station you want to preset.
1
2 Press .
[ENTER/MEMO]
The minimum number display "P– –" for the unregistered
preset fl ashes.
Use ( – , ) or
3 [NUMBER] 0 9 +10 [CH –
the number to be preset, then press
The reception frequency and reception mode are preset and the
display switches to the station name input display.
NOTE
When the registered preset number is selected, "
displayed.
To overwrite this preset number, press
Input the station name.
4
Names of up to 8 characters can be input.
[u, i]
• button .................. Selects the character.
• [p] button ........................ Moves the cursor to the right.
[CLEAR/DEL]
•
• Characters that can be input.
• If you do not want to input a station name, press
MEMO]
without inputting anything else.
• If you make a mistake when inputting, perform the procedure
again. Whatever was previously input is overwritten.
5 Press
[ENTER/MEMO]
The characters you have input are entered.
• To give names to other stations, repeat steps 1 to 5.

Listening to preset stations

Use
[NUMBER]
preset number.
Setting the preset channels and changing
the received frequency on the main unit
<8/–, +/9>
preset channel and for tuning.
Before operating them, switch the main unit to the "preset mode" or
"tuning mode" using the procedure below.
1 Press
[MENU]
, to select
CH +]
.
[ENTER/MEMO]
2 Use
[ui]
[ENTER/MEMO]
3 Use
[ui]
[ENTER/MEMO]
" is
*
[ENTER/MEMO]
.
button ......... Deletes the currently selected
character.
A ~ Z, 0 ~ 9, ^ ' ( ) + , - . / = (space)
z
[ENTER/
.
( , ) or to select the
0 – 9 +10 [CH –, CH +]
on the main unit can be used both for switching the
.
to select "TUNER SETUP", then press
or .
[p]
to select "MODE SELECT", then press
or .
[p]
4 Use to select "PRESET MODE" or "TUNING
[ui]
MODE", then press
[ENTER/MEMO]
PRESET MODE
<8/– +/9>
Press ,
switch preset channels.
• This is the same operation as
remote control.
TUNING MODE
<8/– +/9>
Press ,
change the received frequency.
• This is the same operation as
remote control.
ENGLISH
Tuner playback
.
on the main unit to
[CH–, CH+]
on the
on the main unit to
[TU–, TU+]
on the
15