Detailed Description Of Preset Functions - Denon DN-C680 Operating Instructions Manual

(3) Detailed Description of Preset Functions

(* = initial setting)
1) "Preset Type (*1" (Three different sets (types) of presettings can be made and used for different purposes.)
* Preset Type1
Preset Type2
Preset Type3
2) "CueDet. (-**) dB"
CueDet. (-**) dB
3) "Sleep ON (OFF)"
* Sleep ON
Sleep OFF
4) "FS OFF (***kHz)" (This setting can only be made when an optional FS converter is mounted.)
* FS OFF
FS (***kHz)
5) "Programl OFF (ON)"
Programl OFF (ON)
6) "Progam2 OFF (ON)"
Program2 OFF (ON)
7) "Program3 OFF (ON)"
Program3 OFF (ON)
8) "D.Out Pro (Cons)"
*D.Out Pro
D.Out Cons
9) "Subcode ON (OFF)" (When "D.Out Cons" is set above, subcodes can be output with the digital output signals.)
Subcode ON
*Subcode OFF
NOTE: 0 sec. start is not possible when the above is set to "Subcode ON".
10) "End Mon. (**)sec"
End Mon. (**)sec
End Mon. OFF
11) "E.O.M. (**)sec" (Output EOM tally signal to remote pint (24))
E.O.M. (**)sec
E.O.M. OFF
12) "Next Stb.Off (ON)"
*Next Stb.OFF
Next Stb.ON
13) "FadeIn OFF ('s)"
Fadeln OFF (***s)
14) "FadeOut OFF (***s)"
FadeOut OFF (***s)
15) "Normal (+/-***%) Speed"
*Normal Speed
(+/-***%) Speed
24
: Set to preset type 1.
: Set to preset type 2.
: Set to preset type 3.
: Set the audio detection level for cueing. (-72/-66/*-60/-54/-48/-42/-36)
: Automatically turn the servo functions off if no button is operated for 30 minutes in the pause, standby or manual
search mode.
: Do not automatically turn the servo functions off.
: Do not use the FS converter.
: Select the digital output FS. (32kHz/44.1 kHz/48kHz)
: Store the contents of program 1 when on. (Initial setting-OFF)
: Store the contents of program 2 when on. (Initial setting - OFF)
: Store the contents of program 3 when on. (Initial setting - OFF)
: Output digital signals in AES/EBU format.
: Output digital signals in consumer format.
: Output subcodes with the digital output signals. (consumer SPDIF format)
: Do not output subcodes with the digital output signals. (consumer IEC 958 Type II format)
: Set the end monitor time. (5/*10/15/20/25/30/35)
: Do not use the end monitor function.
: Set the EOM time. (0/5/*10/15/20/25/30)
. Do not use the EOM function.
: Return to the play start position and standby when the STANDBY/CUE button is pressed during playback.
: Standby at the beginning of the next track when the STANDBY/CUE button is pressed during playback.
: Set the fade in time. (*OFF/10m/50m/0.1/0.5/1/2)
: Set the fade out time. (*OFF/10m/50m/0.1/0.5/1/2)
: Play at normal speed.
: Play at variable speed. t(0.2/0.4/0.6/0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.4/2.6/2.8/3.0)