300 V 3.0 Owner's Manual
Control Mode
Page One
Time Code Event List
3-22
If the Soft knob value is set to 37, and then stored into a Setup Register, when
you recall that Setup, the knob will automatically set the effect parameter value
which it controls.
It is also important to understand that, if you load a Setup which has a Soft knob
value of say, 66, and then load any other effect(s) into that setup, any Soft knob
patches which exist in the newly loaded effect(s) will cause the linked parame-
ters to jump to some new value . The Soft knob value controls the linked
parameter(s) at all times.
Control mode provides access to general global parameters and miscellaneous
functions including audio configuration. Selecting Control mode does not
interrupt the audio operation of the 300.
There are nine Control mode pages:
Event List
MIDI Mode and Map Table
Machine Configuration
Digital Interface and Sampling Rates
SCMS Mode
Emphasis
Bypass/Effect Load Mode
Copy Tools
Purge Tools
Each of these pages is described below.
Event List:
ADD
This page allows creation and modification of a list of up to 50 events triggered
standard timecode or MIDI timecode. Four main functions are provided: Add,
Delete, Edit and Snap. (For more information, see Chapter 6: Time Code
Operation.
OFF
DEL
EDIT
Lexicon
VIEW
SNAP