Lexicon 300 - V3.0 REV Owner's Manual page 107

P311 CC:Pch->Comp
EA:802 Guit Shift
This preset combines a guitar shift effect going into an "easy" compressor effect. The LFO controls the Glide Shift parameter
(GLD) in Machine A. The LFO rate is set to 0.16Hz with a sine waveform.
MchA EA:802 Guitar Shift This preset offers a heavy amount of micropitch shift (-21c), along with a small amount of
recirculating predelay. Raunchy sounding on "beefy" guitars.
MchB EB:901 EZ Comp 2:1 A nice preset to add to an overall mix. You may need to adjust the Threshold parameter to
make it work for the particular signal you're feeding it. Release is set to gently fall away after 363ms. If you're using this with
a guitar, you might want to grab the SLP (slope) control and increase the value.
P312 CC:*SurrVerb
EA:720 Recital Hall
Machine B (Small Stereo Adjust) has three Soft knob patches which control the spacial placement of the source audio —
in this case, the output of the reverb effect. In a surround mixing environment, advancing the Soft knob parameter will place
more of the reverb into the surround channel — assuming the returns of the 300 are panned hard left and right at the console.
MchA EA:720 Recital Hall This medium large (44.5M) space opens sound sources beautifully. Made for string pads and
voice.
MchB EB:010 *Small St.Adj This preset is a cut down version of the larger Stereo Adjust program available in Single
Setups. This particular preset has the Soft knob patched to three parameters: Spatial EQ (SPEQ), Bass Left (BASL), and
Bass Right (BASR) boosts and cuts.
P313 CC:*V3Comp
EA:010 *Small St Adj
This is a straight ahead stereo compressor setup. Use it in a mix insert point or pre-fade send.
MchA EA:010 *Small St.Adj This preset is a cut down version of the larger Stereo Adjust program available in Single
Setups. This particular preset has the Soft knob patched to three parameters: Spatial EQ (SPEQ), Bass Left (BASL), and
Bass Right (BASR) boosts and cuts.
MchB EB:901 EZ Comp 2:1 A soft and easy preset to add to an overall mix. You may need to adjust the Threshold
parameter to make it work for the particular signal you're feeding it. Release is set to gently fall away after 363ms.
P314 CC:V3Chamber
EA:701 Chamber
This preset is a reverb ahead of the dither program. The reverb is essentially untouched as it passes through Machine B.
Remember, the chamber algorithm is actually mono in, stereo out.
MchA EA:701 Chamber A great general purpose reverb tail. Size is set to 28.1M (the largest value is 64M), so the density
is rather close in. As you adjust Size, Rt will also change. If you want to unlink this natural phoenomena, set LINK to Unlink
(on Page Two).
MchB EB:001PONS / Dither This preset has dither turned on and set to PONS (Psycoacoustically Optimized Noise
Shaping), with level of 32. Experiments have shown this to be an optimum starting level of dither.
EB:901 EZ Comp 2:1
EB:010 *Small St. Adj
EB:901 EZ Comp 2:1
EB:001 PONS+Dither
The Presets
5-15