Tx Gnrl Group; Tgen Emrgncy - Yaesu FT-950 Operating Manual

M M
ENU ODE
109 TGEN PROCLVL
Function: Sets a compression level of the Speech Proces-
sor.
Available Values: 0 ~ 100
Default Setting: 50
110 TGEN EXT TUN
Function: Enable/disable the optional FC-40 Antenna
Tuner.
Available Values: itu/Etu (INTERNAL TUNER/EXTER-
NAL TUNER)
Default Setting: itu (INTERNAL)
itu (INTERNAL TUNER): The [ TUNE ] button will ac-
Etu (EXTERNAL TUNER): The [ TUNE ] button will ac-
111 TGEN TX PWR
Function: Sets a transmitter output level.
Available Values: 5 ~ 100 %
Default Setting: 100 %
112 TGEN AM CAR
Function: Sets a carrier power output level.
Available Values: 0 ~ 100
Default Setting: 50
113 TGEN PWRCTRL
Function: Setting the menu item "111 TGEN TX PWR
Available Values: ALL/CAr
Default Setting: ALL
ALL: The Menu Item "111 TGEN TX PWR 111 TGEN TX PWR" affects all
111 TGEN TX PWR 111 TGEN TX PWR 111 TGEN TX PWR
modes except AM.
CAr: The Menu Item "111 TGEN TX PWR 111 TGEN TX PWR" affects all
111 TGEN TX PWR 111 TGEN TX PWR 111 TGEN TX PWR
modes except SSB. In this case, the SSB output
power will be set to maximum, regardless of the
setting of the Menu Item "111 TGEN TX PWR
Page 118
TX GENERAL G
tivate the internal Antenna
Tuner.
tivate the optional FC-40
Antenna Tuner.
111 TGEN TX PWR 111 TGEN TX PWR
111 TGEN TX PWR". 111 TGEN TX PWR
111 TGEN TX PWR 111 TGEN TX PWR". 111 TGEN TX PWR
111 TGEN TX PWR
ROUP
114 TGEN VOX SEL
Function: Selects the audio input source for triggering TX
during VOX operation.
Available Values: nic/dAtA
Default Setting: nic
nic (MIC): The VOX function will be activated by mi-
crophone audio input.
dAtA (DATA): The VOX function will be activated by
data audio input port (pin 1) of the RTTY/
PKT Jack.
115 TGEN V GAIN
Function: Adjusts the "VOX" Gain on the SSB/AM/FM
modes.
Available Values: 0 ~ 100
Default Setting: 50
116 TGEN VOX DLY
Function: Adjusts the "VOX" Delay (receiver recovery)
time on the SSB/AM/FM modes.
Available Values: 30 ~ 3000 msec (10 msec/step)
Default Setting: 500 msec
117 TGEN ANTIVOX
Function: Adjusts the Anti-VOX Trip Gain, which is the
level of negative AF feedback of receiver audio to the mi-
crophone, to prevent receiver audio from activating the
transmitter (via the microphone) during VOX operation.
Available Values: 0 ~ 100
Default Setting: 50

118 TGEN EMRGNCY

Function: Enables Tx/Rx operation on the Alaska Emer-
gency Channel, 5167.5 kHz.
Available Values: EnA(ENABLE)/diS(DISABLE)
Default Setting: diS(DISABLE)
When this Menu Item is set to "EnA(ENABLE)," the spot
frequency of 5167.5 kHz will be enabled. The Alaska
Emergency Channel will be found between the Memory
channels "P-1" and "01 (or 1-01)."
Important: The use of this frequency is restricted to sta-
tions operating in or near Alaska, and only for emergency
purposes (never for routine operations). See §97.401(c)
of the FCC's regulations for details.
FT-950 O M
PERATING ANUAL