Multi Function Row “E” (Mfe) [Ton, -------, Tdch] ([Enc, Dec, Tdch]); Multi Function Row “F” (Mff) [Arts, Srch, Pms]; Multi Function Row “G” (Mfg) [Scn, Pri, Dw]; Multi Function Row “H” (Mfh) [Scop, Wid, Step] - Yaesu FT-897D Operating Manual

Multi Function Row "e" ( MFe ) [ TON, -------, TDCH ] ([ ENC, DEC, TDCH ])
[ A ] [ B ] [ C ]
[ A ] [ B ] [ C ]
[ A ] [ B ] [ C ]
[ A ] [ B ] [ C ]
[ A ] [ B ] [ C ]
FT-897D O M
F P
RONT
[ A ] Key: TON/ENC
Press the [ A ]( TON ) key to activate CTCSS or DCS operation on FM.
When the Split Tone feature is activated via Menu Mode No-079 [ SPLIT TONE ] , this key function changes to "ENC" for
activation of the CTCSS Encoder or DCS Encoder. Press the [ A ]( ENC ) key to activate the encoder.
Press and hold in the [ A ]( TON/ENC ) key for one second to recall Menu Mode No-083 [ TONE FREQ ] (for selecting the
CTCSS tone frequency).
[ B ] Key: ------ /DEC
Normally, this key does nothing.
When the Split Tone feature is activated via Menu Mode No-079 [ SPLIT TONE ] , this key function changes to "DEC" to
engage the DCS or CTCSS Decoder. Press the [ B ]( DEC ) key to activate the decoder.
Press and hold in the [ B ]( DEC ) key for one second to recall Menu Mode No-033 [ DCS CODE ] (for selecting the DCS
code).
[ C ] Key: TDCH
Press the [ C ]( TDCH ) key to initiate CTCSS Tone or DCS Search.
Multi Function Row "f" ( MFf ) [ ARTS, SRCH, PMS ]
[ A ] Key: ARTS
Press the [ A ]( ARTS ) key to initiate the Auto-Range Transponder mode.
Press and hold in the [ A ]( ARTS ) key for one second to recall Menu Mode No-008 [ ARTS BEEP ] (for selecting the ARTS
"Beep" option).
[ B ] Key: SRCH
Press the [ B ]( SRCH ) key to activate the Smart Search feature.
Press the [ B ]( SRCH ) key to initiate Smart Search scanning.
[ C ] Key: PMS
Press the [ C ]( PMS ) key to activate the Programmable Memory Scan feature.
Multi Function Row "g" ( MFg ) [ SCN, PRI, DW ]
[ A ] Key: SCN
Press the [ A ]( SCN ) key to initiate the Scanning (in the direction of higher frequencies).
[ B ] Key: PRI
Press the [ B ]( PRI ) key to activate the Priority Scan feature.
[ C ] Key: DW
Press the [ C ]( DW ) key to activate the Dual Watch feature.
Multi Function Row "h" ( MFh ) [ SCOP, WID, STEP ]
[ A ] Key: SCOP
Press the [ A ]( SCOP ) key to activate the Spectrum Scope Monitor feature.
Press and hold in the [ A ]( SCOP ) key for one second to initiate the Spectrum Scope.
[ B ] Key: WID
Press the [ B ]( WID ) key to select the visible bandwidth for the Spectrum Scope Monitor.
Press and hold in the [ B ]( WID ) key for one second to select the operating mode for the Spectrum Scope Monitor.
[ C ] Key: STEP
Press the [ C ]( STEP ) key to select the channel steps for Spectrum Scope Monitor.
Press and hold in the [ C ]( STEP ) key for one second to activate the MAX HOLD feature, which will display and hold the
peak signal strength level for each channel.
C
ANEL ONTROL
& S
WITCHES
Page 15