Data Management Feature - Yaesu FT DX 9000MP Operation Manual

C C C C C F F F F F
ONVENIENT ONVENIENT EA EA EA EA EA TURES
ONVENIENT ONVENIENT ONVENIENT
The Data Management Unit enables display, either on the internal TFT display (option) or an external monitor, of a number
of useful features. These include the World Clock, Spectrum Scope, Audio Scope/Oscilloscope, Log Book, Temperature
and SWR indication, Rotator Control and Great Circle Map, and the Memory and Menu list features. For details, please
consult the separate Data Management Unit Operating Manual.
Function Key ON/OFF
If you press and hold in the [ ENT ] key: associated with
the [ BAND ] keys) for two seconds, white function-indica-
tion tabs will appear along the bottom of the monitor screen,
indicating the effects of pushing the various [ BAND ] keys
so as to execute commands associated with the particular
display page selected. Pressing and holding in the [ ENT ]
key once more (for two seconds or more) will disable the
command key tabs, and will restore band selection using
these keys.
Function Selection
When the [ 8/21 ] (DISPLAY) key (associated with the
[ BAND ] keys) is pressed momentarily, the display page
will change.
If you press and hold in the [ 8/21 ] (DISPLAY) key for at
least two seconds, the page will revert to the previous page.
World Clock Spectrum Scope
Audio Scope/Oscilloscope
Temperature and SWR indication
Rotator Control and Great Circle Map
Memory Channel List
Page 60
TURES TURES
TURES TURES
D M
ATA ANAGEMENT
Log Book
World Clock ......
Function Tabs
F
EATURE
[BAND] Key
VDD
[8/21] Key
A A A A A
D D D D D VICE VICE VICE VICE VICE
Without programming any changes on the current
page, you can just press the [ 8/21 ] (DISPLAY) key
momentarily at any time to move to the next page.
The precise command that is engaged by each
function key will depend on which display page
is selected. Simply look at the optinal TFT or ex-
ternal monitor to determine the function for the
currently-selected page.
"MY Screen" Setup
You may omit (skip) one or more screens from the
screen selection loop for faster recall of your favorite
screen, if desired.
1. Press the [ MNU ] key to enter the Menu mode.
2. Rotate the [ MAIN Tuning Dial ] knob to select
Menu item "DISPLAY 021 MY SCREEN".
3. Rotate the [ CLAR/VFO-B ] knob to choose a
screen you wish to omit (skip) from the screen
selection loop.
4. Press the [ ENT ] key to set the omission command
to "ON".
5. Repeat steps 3 and 4 to select/deselect as many
screens as you like.
Note: The "ON" command sets the selected screen
to be skipped, while the "OFF" command sets the
selected screen to be included in the screen selec-
tion loop.
6. Press and hold in the [ MNU ] key for two seconds
to store the new number and exit to normal op-
eration.
You may want to select more than one screen while
in "My Screen". If you select only one screen, you
will not be able to call any other screens when you
press the [ 8/21 ] (DISPLAY) key.
FT 9000MP O
DX
BIAS TEMP SWR
[ENT] Key
M
PERATION ANUAL