CONCORD EYE-Q DUO 2000 Faq page 3

The camera can be used as a web camera and video conferencing camera.
Make sure to set the camera to PC mode to use the webcam feature and follow
the steps to set the camera to PC mode:
1. Turn on the camera.
2. Set the Model switch to
.
3. Press the Menu button and use the button until the Setup is highlighted.
In the Setup menu, press until Driver is highlighted.
Press to select PC.
Connect the camera to the computer.
4. Turn off the camera.
After the steps above, you can use the camera as a webcam with Net Meeting.
Follow the steps below to use the webcam with Net Meeting:
1. Launch the Microsoft Net Meeting by clicking the Start on the computer, and
then click the Run...and a window pops up below, then type the "conf" in this
window and click OK. If you do not have Net Meeting already installed on your
computer, please visit www.microsoft.com for instructions on how to obtain a
copy.
2. Connect the camera to PC.
3. Set up a call with the person you want.