Table of Contents
Advertisement
•
Check for hydraulic oil leaks on the
cylinders, along the hydraulic lines, and at
tractor hydraulic ports.
•
Ensure each hydraulic cylinder is installed
and retained correctly. Ensure the proper
size pins are used to retain the cylinders in
place and are secured with pins.
•
Check the condition of the flail unit hinge
pins.
•
Check the overall condition of the mower
main frame.
•
Inspect
mower
bearings, and lug nut torque.
0042_A
Do not operate this Equipment with hydraulic oil or fuel leaking. Oil
and fuel are explosive and their presence could present a hazard. Do
not check for leaks with your hand! High-pressure oil streams from
breaks in the line could penetrate the skin and cause tissue damage
including gangrene. To check for a hose leak, SHUT the unit ENGINE
OFF and remove all hydraulic pressure. Wear oil impenetrable gloves,
safety glasses and use Cardboard to check for evidence of oil leaks. If
you suspect a leak, REMOVE the HOSE and have it tested at a Dealer.
If oil does penetrate the skin, have the injury treated immediately by a
physician knowledgeable and skilled in this procedure.
VERSA PRO 03/09
© 2009 Alamo Group Inc.
OPERATION
tire
condition,
wheel
OPS-F-
Operation Section 4-17
(SG-15)
Advertisement
Table of Contents
