Pickup/Wah; Compressor - DigiTech RP200A User Manual

Pickup/Wah

The Pickup Simulator provides the thick tone of a humbucker pickup to a guitar with single
coil pickups, or the bright edgy sound of a single coil pickup to a guitar with a humbucker.This
allows you to have the best of both worlds without having to change guitars during a
performance.
Wah is an effect controlled by an Expression Pedal making the guitar sound as if it's saying "Wah."
Pickup Type - The Parameter 1 knob selects the Pick Up type which will be simulated.Values
include:
pick up the warm tone of a humbucker), and
unique sound of a single coil).
Wah Type - The Parameter 2 knob selects the Wah Type.Values include:
Wah Effect off),
Wah is a wide sweeping Wah with a more modern sound) and
Wah sweeps the entire spectrum of audible frequencies).
Wah Position - The Parameter 3 knob adjusts the Wah Pedal Position. Ranges from

Compressor

A Compressor is used to increase sustain, tighten up guitars, and prevent the signal from
clipping the input of other effects. It sets a maximum boundary for the strength of a signal.
Comp Type - The Parameter 1 Adjusts the length of time it takes for the Compressor to
respond to a signal exceeding the boundary. Values include:
Compressor off) to
16
(Turns the Pickup Simulator off),
(Cry Wah is a traditional sounding Wah),
up) to (toe down).
, , and
(Gives a single coil
(Gives a humbucker the
.
(Turns the
(Boutique
(Full Range
(toe
(Turns the