Factory Reset - DigiTech RP200A User Manual

Factory Reset

This function resets the RP200 Artist to its original factory settings.This procedure will erase all
custom user Presets, and recalibrate the Expression Pedal.
ATTENTION: Performing this function will erase all user-programmed data. All such data
will be lost forever! Be sure you want to erase the memory and start fresh
before continuing with this procedure.
The procedure for performing a Factory Reset is as follows:
1. Disconnect the power supply from the RP200 Artist.
2. Press and hold the Select button while re-connecting the power to the RP200 Artist.
3.When the display shows
The display will briefly read
factory settings. At this point, the RP200 Artist will automatically advance to the Expression
Pedal calibration menu. Follow steps 4 through 7 of the Expression Pedal calibration section.
, release the Select button and press the Store button.
indicating that the RP200 Artist has reset the original
29