Delay - DigiTech RP200 User Manual

Whammy (no Dry Signal)
1OCTUP (1 octave above)
2OCTUP (2 octaves above)
2NDDWN (a second below)
REV2ND (a second below reversed pedal action)
4THDWN (a fourth below)
1OCTDN (an octave below)
2OCTDN (2 octaves below)
DIVBOM (Dive Bomb)
Level - The Parameter 3 knob adjusts the volume of the Whammy™. Ranges from 0 to 99.

Delay

Delay is an effect that will record a portion of the incoming signal, and then play it back a short
time later.The recording can repeat just once or several times.
Type/Level - The Parameter 1 knob selects one of the 3 different types of Delay, as well as
the volume level of the Delay.Values include: DLY OF (Turns the Delay Effect off),
MONO 1 through MONO 9 (Digital Delays with increasing Level amounts), ANLG
1 through ANLG 9 (Analog Delays with increasing Level amounts), PONG 1
through PONG 9 (Ping Pong Delays with increasing Level amounts).
Delay Time - The Parameter 2 knob adjusts the amount of Delay time. Ranges from 1
through 99 (10 through 990 ms in 10 ms increments), and 1.0 through 2.0 (1
seconds through 2 seconds in 100 ms increments).
Delay Feedback - The Parameter 3 knob adjusts the number of repeats. Ranges from 0 to 99
and R-HOLD (infinite repeat).
Harmony Bends (Dry Signal Added)
M3>MA3 (a minor third to a Major third)
2NDMA3 (a second above to a Major third above)
3RD4TH (a third above to a fourth above)
4TH5TH (a fourth above to a fifth above)
5THOCT (a fifth above to an octave above)
HOCTUP (one octave above)
HOCTDN (one octave down)
25