Amplifier; Cabinet; Compressor - DigiTech Genesis 1 User Manual

Amplifier

The Genesis1 has eleven amp models to select from including 2 models
created using G N
E
to select the amp model you want to use. Each amp model is labeled on
the front panel. The Amplifier knob has a pointer that identifies the
selected model. The amp models are:
Black Face: '65 Fender Twin Reverb
Boutique: Matchless DC30
Rectified: Mesa Dual Rectifier
'78 Marshall Master Volume
Brit Stack:
Tweed: '57 Fender Tweed Deluxe
Brit Combo:Vox AC30
Fuzz: A vintage fuzz distortion
Hot Rod: Mesa Boogie Mark II C
High Gain: A high gain tube amp
G N X™ Gain: Rectifier and High Gain Hypermodel™
E ET
G N X™ Crunch: Hot Rod and Brit Stack Hypermodel™
E ET
Marshall® is a registered trademark of Marshall Amplification Plc. Vox® is a registered trademark of Korg
UK. Fender, Matchless, and Mesa Boogie, are trademarks of their respective companies and are in no way
associated with DigiTech.

Cabinet

The Genesis1 has ten cabinet types and one direct setting to select from.
CABINET
Rotate the
Each cabinet type is labeled on the front panel. The Cabinet knob has a
pointer that identifies the selected cabinet type. The cabinet types are:
Direct
American 4x10
British 4x12
Vintage 4x12
Tweed 1x12
Green 4x12

Compressor

The Genesis1 compressor is used to limit peak signals (LOW/MED) or to
increase sustain (HIGH). The Compressor button has a 3-color LED
(Red, Green,Yellow) that indicates the 3 different compressor settings.
COMP
Press the
want to use. The compressor threshold is fixed, and the ratio and output
gain are simultaneously controlled. As the compressor ratio increases, the
output gain increases giving no apparent change in output volume, but
compressing the signal to limit peaks and increase sustain. The compres-
sor settings are: LOW (Red), MED (Green), and HIGH (Yellow). When
the LED is off, the Compressor is bypassed.
4
X™ technology. Rotate the
ET
knob to select the cabinet you want to use.
British 2x12
American 2x12
Blonde 2x12
G N X™ 2x12
E ET
G N X™ 4x12
E ET
button until the LED color lights with the setting you
AMPLIFIER
knob