Getting Started; Making Connections; Mono Operation - Amplifier - DigiTech RP250 User Manual

Getting Started

Making Connections

There are several different connection options available with the RP250. Before connecting the
RP250, make sure that the power to your amplifier and the RP250 is turned off. There is no
power switch on the RP250. To turn the RP250 on or off, connect or disconnect the included
PS0913B power supply from the Power Input jack.

Mono Operation - Amplifier

Connect your guitar to the Input of the RP250. Connect a single mono instrument cable from
the Left (Mono) output of the RP250 to the instrument input or effect return on your amplifier.
Set the Amp/Mixer switch to Amp.
NOTE: When using a
guitar amp, it may be best
to connect the guitar to the
Input of the RP250 and the
Output of the RP250 to the
effect return of the amplifier.
12
Guitar Amp Input/Effect Return
Left (Mono)
Input
Output
Amp/Mixer
switch set to
Amp.