Connection Diagrams; Amplifier Setup; Mixer Setup - DigiTech SDRUM Owner's Manual

Connection Diagrams

Amplifier Setup

IN
Amp
OUT
NOTE: When only the AMP OUT jack is used, the drum signal will be processed to make the drums sound
better when played through a guitar amp. See 'Output Jack Operation' on page 10 for more information.
If using guitar effects and/or a looper in this type of application, they should be placed before the SDRUM so
they do not affect the drum signal. Note that the effects may need to be bypassed to use BeatScratch.

Mixer Setup

IN
Mixer Mixer
NOTE: When only the MIXER OUT jacks are used, the mono guitar signal and stereo drum signal are fed to
the MIXER OUT jacks. This setup works well for applications where an acoustic guitar with a pickup or a bass
guitar are connected to a live PA system. See 'Output Jack Operation' on page 10 for more information.
Connection Diagrams
IN
IN TRS CABLE
FS3X Footswitch
PS0913DC (9VDC)
UNBALANCED TS OR
BALANCED TRS CABLES
HARMAN
PS0913DC (9VDC)
Power Adapter
UNBALANCED TS CABLES
OUT
Guitar Effects
HARMAN
Power Adapter
IN
OUT
IN
OUT OUT
IN
Optional
TRS CABLE
FS3X Footswitch
Optional
8