Specifications/Technische Daten - Dynacord SL 1200 Owner's Manual

Specifications/Technische Daten

Amplifier at rated conditions, both channels driven, 8 Ω load, unless otherwise specified.
Load Impedance
Maximum Midband Output Power
THD = 1%, 1 kHz, Dual Channel
Rated Output Power
THD < 0.1%, 20 Hz...20 kHz
Maximum Single Channel Output Power
Dynamic-Headroom, IHF-A
Maximum Single Channel Output Power
Continuous, 1 kHz
Maximum Bridged Output Power
THD = 1%, 1 kHz
Maximum RMS Voltage Swing
THD = 1%, 1 kHz
Power Bandwidth
THD = 1%, ref. 1 kHz, half power @ 4 Ω
Voltage Gain, ref. 1 kHz
Input Sensitivity
rated power @ 8 Ω, 1 kHz
THD at rated output power
MBW = 80 kHz, 1 kHz
IMD-SMPTE, 60 Hz, 7 kHz
DIM30, 3.15 kHz, 15 kHz
Maximum Input Level
Crosstalk
ref. 1 kHz, at rated output power
Frequency Response, ref. 1 kHz
Input Impedance, active balanced
Damping Factor, 1 kHz
Slew Rate
Signal to Noise Ratio Amplifier
A-weighted
Output Noise, A-weighted
Output Stage Topology
Power Requirements
Power Consumption
1/8 maximum output power @ 4 Ω
Mains Fuse
Protection
Cooling
Ambient Temperatur Limits
Safety Class
Dimensions (W x H x D), mm
Weight
Signal Processing
Optional
Depending on the ambient temperature, the unit might not operate continously at 2 Ω load in Dual Mode or 4 Ω in Bridged Mode.
In addition input power exceeds 1.1 times rated power consumption with 2 Ω load in Dual Mode or 4 Ω load in Bridged Mode
SL 900
2 Ω 4 Ω 8 Ω 2 Ω
650 W 450 W 270 W 900 W 600 W 380 W 1250 W 900 W 550 W 1800 W 1200 W 750 W
- 400 W 200 W -
1150 W 660 W 350 W 1700 W 950 W 480 W 2450 W 1400 W 700 W 3400 W 1800 W 950 W
850 W 540 W 310 W 1200 W 750 W 420 W 1700 W 1100 W 630 W 2400 W 1500 W 850 W
- 1300 W 900 W -
55.3 V
+2.2 dBu (1.0 V ) +3.1 dBu (1.11 V
rms
25 V/μs
> 106 dB
Class AB
240 V, 230 V, 120 V or 100 V; 50 Hz...60 Hz (factory configured)
550 W
240 V / 230 V: T10AH; 240 V / 230 V: T12AH;
120 V / 100 V: T20AH 120 V / 100 V: T25AH
Audio limiters, High temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn-
12.6 kg (27.8 lbs) 14.8 kg (32.6 lbs)
2-Way crossover, internal filter card, 24 dB, LR
330 Hz (NRS 90249), 500 Hz (NRS 90250),
800 Hz (NRS 90251), 1200 Hz (NRS 90252)
STANDARD PRECISION SERIES
SL 1200 SL 1800
4 Ω 8 Ω 2 Ω 4 Ω
500 W 250 W - 800 W 400 W
1800 W 1200 W - 2800 W 1800 W
65.1 V 78.8 V
< 10 Hz...30 kHz
32.0 dB
) +5.1 dBu (1.39 V
rms
< 0.03%
< 0.1%
< 0.05%
+21 dBu (8.69 V )
rms
< -80 dB
10 Hz...40 kHz (±1 dB)
20 kΩ
> 300
26 V/μs 27 V/μs
> 107 dB > 109 dB
< -71 dBu
700 W 700 W
240 V / 230 V: T15AH;
120 V / 100 V: T25AH
on delay
Front-to-rear, 3-stage-fans
+5 °C...+40 °C (40 °F...105 °F)
I
483 x 88.1 x 421.5
16.3 kg (35.9 lbs)
LPN, switchable
Owner's Manual / Bedienungsanleitung
SL 2400
8 Ω 2 Ω 4 Ω 8 Ω
- 1100 W 550 W
- 3600 W 2400 W
90.6 V
) +6.6 dBu (1.66 V )
rms rms
30 V/μs
> 110 dB
Class H
850 W
240 V / 230 V: T15AH;
120 V / 100 V: T30AH
17.7 kg (39.0 lbs)
23