Function Menu; Menu Language; Aspect Ratio; Osd Timeout - Haier LE32N1620 Owner's Manual

Function menu

Menu Language

select the language which will be used for displaying
menus and messages.
1
Press the MENU button and then use the
button to select the Function menu.
2
Press the / ENTER button and then use the
/ button to select Language.
3
Press the / button to select a language.
( English,
Español or Français
Language
Video

Aspect Ratio

Audio

OSD Timeout

Channel

DPMS

CEC Setup Menu

DCR
Lock
Aspect Ratio
Occasionally, you may want to change the size of the
image on your screen. Your TV comes with several screen
types of video input. Your cable box/satellite receiver
may have its own set of screen sizes as well. In general,
though, you should view the TV in Normal mode as
much as possible.
Note
long time, the image may become permanently
burned on the screen and remain visible.
1
Press the MENU button and then use the
/ button to select the Function menu.
2
Press the / ENTER button and then use the
/ button to select Aspect Ratio.
3
Press the / button to select
Cinema, Zoom.
Note
You could only select 16:9 and Normal mode in
PC source.
/
)
English
Normal
Long
On
Off
Enter Move Exit
16:9, Normal,
OSD Timeout
1
Press the MENU button and then use the
/ button to select the Function menu.
2
Press the / ENTER button and then use the
/ button to select OSD Timeout.
3
Press the / button to select Short, Middle
or Long. (Short is for 5 seconds; Middle is for 10
seconds; Long is for 15 seconds)
DPMS
Press the / ENTER
1
In PC mode, the TV will go into standby mode
automatically if there is no PC input signal present
for 1 minute. The set will turn on and automatically
go into PC mode when the PC input is connected.
2
With all other sources, the set will go into standby
mode automatically if there is no signal present for
5 minutes.
CEC Setup Menu
Consumer Electronic Control (CEC) allows you to control
other devices using your remote control when those
devices are connected via HDMI.
1
Press the TOOLS button on the remote and then use
the / button to select CEC Setup Menu.
2
Press the / button to set.
CEC function
TV will not send or receive any CEC commands.
Device Discovery: Register devices with your TV. Before
CEC will work, perform a device discovery to see if there
are any CEC supported devices connected to your TV.
Note
Only devices that support CEC will be compatible
with this function.
Operation
Haier LED HDTV EN-20