Channel Skip; Time Shifting Mode; Audio Language - Haier LE32N1620 Owner's Manual

Operation

Channel Skip

A channel that has been set to skip will not be viewable
when using the / buttons to browse channels. A
skipped channel can be viewed by using the remote
control keypad to select the skipped channel. Default
unscanned analog channels are set to skip. Channels
with a check mark icon are skipped channels..
1
Press the MENU button and then use the
button to select the Channel menu.
2
Press the / ENTER button and then use the
/ button to select Channel Skip.
3
Press the / button to select a channel, then
press the ENTER button to toggle between and .
2
Video
3
Audio
4
5
6
7
8
Function
9
Lock
10

Time Shifting Mode

Time Shift works in TV mode, only. To use Time Shift, it
must be enabled in the Function menu. A compatible
USB drive must also be installed.
To set up your installed USB drive, press REC. Follow the
instructions provided on the screen to complete the Disk
Setup guide.
After the Disk Setup guide has been completed
successfully:
1
Press PLAY/PAUSE to play or pause the program. If
you want to stop the time shift function, press the
EXIT button.
-00:00:01 7:00
-00:00:01 7:00
1
x
1. Time shift time. The time delay to the current
program time.
2. Playback status: Shows the current status (Play,
Pause, Fast Forward, Rewind).
EN-17 Haier LED HDTV
Analog
Analog
Analog
Analog
Analog
Analog
Analog
Analog
Analog
Set Select
7:30
7:30
3. Playback speed: Shows the current playback
speed (1x,2x,4x,8x,16x,32x).
4. Playback position: Shows the current playback
position. The playback position is always at the
center of the time bar.
5. Time scale: shows the time in half hour
increments.
/
Note
Time Shift function is only available in TV mode.
Please connect the TV antenna or Cable TV coaxial
cable to the Antenna input on the TV. Then,
complete the channel scan. The Time Shift feature
only is available when using your ATSC tuner and
QAM cable tuner.
The maximum recording duration is determined
by the memory size of the USB drive and the signal
resolution. Please use a high-speed USB 2.0 drive
with a minimum capacity of 1 GB.
Time shift is only supported on USB drives
Time shift supports recordings larger than 4 GB by
Back
When the maximum recording duration is reached,
the oldest program will be deleted and replaced by
the newest program.
When changing channels or changing input
source, the time shift will stop automatically.
Time shift will store video, audio and data service.
Maximum allowed:
Recordings are not guaranteed to be stored on the
disk. If the timeshift playback plays a corrupted
data block, it will show "Data lost" message
to indicate that the current data is not stored
correctly.
Do not quickly and repeatedly change operations
between play/pause/stop/fast forward/fast
backward
If the phenomenon of TV crashes, please re-power-
on boot.
Play/Pause
Stop
Video streams: Max 1 stream
Audio streams: Max 8 streams
CC stream: Unlimited.
Fast forward
Fast backward