Connecting Headphones; Connecting To A Network; Choosing A Wireless Or Wired Network Connection; Using The Wireless Network Adapter - Haier LE32N1620 Owner's Manual

Operation

Connecting Headphones

Connect a set of headphones to your TV to watch
programs without disturbing the other people in the
room.
Back of TV
Plug a set of headphones into the 3.5 mm jack on the
back panel of the TV.
Note
Prolonged use of headphones at a high volume
may damage your hearing.
When headphones are connected, the TV's
speakers will remain active. To disable the
speakers: 1) Select the Audio menu and press
the / ENTER button; 2) Press the
select Speaker and then press the
.

Connecting to a Network

Choosing a wireless or wired net-
work connection
A wireless connection is the easiest way to connect your
TV to the internet. Under ideal conditions, a wireless
connection is fast enough to display HD quality video on
your TV.
A wired connection can be a good choice if you have an
Internet router that is near your TV. A wired connection
provides a fast and stable connection to display HD
quality video on your TV.
Note
Your Haier TV includes a wireless network adapter,
but you will also need a Wi-Fi router with a
broadband connection to the Internet. If you
do not have a Wi-Fi router, contact your Internet
Service Provider to help you obtain and install one.
The maximum speed supported by the wireless
adapter is 300 Mbps. Actual speeds are dependent
EN-13 Haier LED HDTV

Using the wireless network adapter

To connect your TV to the Internet wirelessly, you will
need:
To install the wireless network USB adapter:
1
2
/ button to
/ button to
1
2
3
4
5
6
7
8
A wireless (Wi-Fi) router connected to the Internet
A wireless network adapter (included)
Remove the cap from the adapter and plug it into
the USB1 or USB2 connectors on the side of the TV.
Side of TV
USB
Wireless
Router
LAN Cable
Turn the TV on and press MENU to access the system
menu.
Press / to select Function and then press Enter.
Press / to select Network and then press Enter.
Press / to select
Enter.
Press / to select Interface and then press
/ to select Wireless.
Press / to select Wireless Setting and then
press Enter.
Press / to select Scan and then press Enter. A
list of available Wi-Fi networks will be displayed.
Press / to select your Wi-Fi network and then
press Enter. Provide the password to your network if
it is required. Press
network.
Wireless LAN Adapter
(WiFi Dongle)
The LAN Port on the Wall
and then press