Using A Wired Network Cable - Haier LE32N1620 Owner's Manual

Note
Do not use symbols in your Wi-Fi network password.
You may need to change your network password on
your wireless router's administration page.
If your wireless router is not configured to
automatically assign an IP address (DHCP), you will
need to manually configure the IP Setting option.
Refer to the Function Menu section of this manual
to learn more.
If your wireless router is not configured to
broadcast the name of your network (SSID), you
will need to manually the Wireless Setting option.
The included wireless network USB adapter will
work with IEEE 802.11 a/b/g/n Wi-Fi networks. An
802.11n Wi-Fi network is required for HD video
quality.
Enable the "Ping" connection feature of your
router if possible.
Select a channel for your wireless router that is
not being used to avoid signal interference and
connection failure.
Video streamed from a DLNA device may not play
smoothly over 802.11 a/b/g networks.

Using a wired network cable

To connect your TV to the Internet with a cable, you will
need:
A Cat-5 LAN cable (or better)
A modem with built-in router that is connected to the
Internet
Refer to the diagram to connect your TV to the Internet.
1
Make sure that your modem is properly connected
to the Internet.
2
Use a LAN cable to connect one of the LAN output
ports of the modem to the TV.
The Modem Port on the Wall
Modem Cable (not supplied)
LAN
Back of TV
External Modem
(ADSL / VDSL / Cable TV)
LAN Cable
(not supplied)
To configure the network options:
1
Turn the TV on and press MENU to access the system
menu.
2
Press / to select Function and then press Enter.
3
Press / to select Network and then press Enter.
4
Press / to select Configuration and then press
Enter.
Configuration
Video
Audio
Channel
Network Upgrade
Applications
Lock
5
Press / to select Interface and then press
/ to select Ethernet.
6
Press / to select IP Setting and then press
Enter.
7
Press / to select Address Type and then press
/ to select AUTO.
8
Wait two minutes, and then press the BACK button
on the remote. Select Connection Test to check the
make sure that your TV is successfully connected to
the Internet.
Note
If your modem/router is not configured to
automatically assign an IP address (DHCP), you will
need to manually configure the IP Setting option.
Refer to the Function Menu section of this manual
to learn more.
There are many network configurations that are
possible. For example, your modem may not have
a built-in router. In such a case, you may need to
purchase a separate router, or you may connect
the TV directly to the modem. Please contact your
Internet Service Provider if you need network
setup assistance.
The terminal port positions and types of your
modem may differ between manufacturers.
If you have an ADSL modem, it must support
automatic connections and DHCP.
Operation
Enter
Enter Move Back
Haier LED HDTV EN-14