Haier LE32N1620 Owner's Manual page 42

Le32n1620 manual
Table of Contents

Advertisement

Universal Remote Control
code will not be saved to memory.
Automatic Scan Programming the Remote
Control
To automatically scan and program the remote control:
1
Turn OFF the device you wish to program. (TV, VCR,
DVD or cable box equipment).
2
Choose the device you wish to program.
3
While pressing and holding the ENTER key, press
the INPUT key and the device LED will turn ON. The
blink, indicating that the remote control is ready for
programming, then release both keys.
4
Press and release the Mute key to enter automatic
scan mode. And the remote will automatically send
codes to the device every 2 seconds.
5
When the device turns ON, press ENTER key to
program the remote control with the new code,
saving it to memory.
6
Press the POWER key, if the device responds, no
further programming is required. If the device does
not respond repeat steps 1 through 5.
7
After searching the entire data-base, this mode will
automatically exit and the LED will blink 3 times. The
will not be saved to memory.
In automatic scan mode, press any key other than the
ENTER key to exit without programming.
Display mode
1
Choose the device you wish to program.
2
To enter display mode, while pressing and holding
the ENTER key, press the INPUT key and the device
LED will turn ON. It will remain on for about 3
seconds and then the LED will blink, indicating that
the remote control is ready for programming, then
release both keys.
3
Press 9 then 8 then 0 to enter display mode.
4
Press the 1 key to get the first digit of the current
code. For example, if the first digit of code is 1, the
led will blink once and remain OFF. Digit "0" in the
code will not be displayed.
5
Press the 2 key to get the second digit of the current
code. For example, if the second digit of the code is
3, then the LED will blink three times.
EN-41
Haier LED HDTV
bout 3 seconds and it will
6
Press the 3 key to get the third digit of the current
code.
7
Only digit 1, 2, 3 are valid in this mode. And the
sequence is not fixed.
The remote control will not send out data in this mode if
you press any key other than the 1, 2 or 3 key.
Pass-Through Features
The remote control provides pass-through features that
allow users to control the TV volume and DVD or VCR
operation while the remote control is in another device
mode.
Volume Pass-Through
The TV Volume/Mute pass-through feature allows you to
control the volume and mute function of your TV while
the remote control is in another device mode. The feature
is applicable for all devices and brands that do not use
the volume control buttons for other purposes.
Playback Control Key Pass-Through
The DVD or VCR playback control key pass through
feature lets you control the PLAY, STOP, PAUSE, REWIND,
FF and RECORD functions of your DVD or VCR while the
remote control operates in other modes. The feature is
applicable for all devices and brands that do not use the
playback control keys for other purposes.
Fast Programming Haier default TV code
Pressing and holding the ENTER key and then press the
POWER key for 3 seconds, the LED will blink 3 times and
turn off, default Haier codeset (001) will be programmed
to the control.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Le32n1620w

Table of Contents