Function; Channel Menu Options - Haier HL24XSL2 Owner's Manual

B
VOL+/ ENTER button to enter the menu
Press
and CH+/- button to go up and down to select the
desired option.
C
Press VOL+/ ENTER button to confirm and CH+/-
button increase and decrease the level to adjust the
selected option to your preference.
D
Repeat step 2 and step 3 until desired audio quality
has been achieved.

Function

Balance:
Press
CH+/-
Y
confirm, then press
VOL+/-
output between left and right speakers.
Bass
:Press button and
CH+/-
Y
to confirm, then press
decrease the level of the lower-pitched sounds.
Treble :Press button and
CH+/-
Y
to confirm, then press
decrease the level of the higher-pitched sounds.
SRS TS XT
: To turn the simulated surround sound on
Y
or off.
Equalizer : To adjust the equalizer Off /Rock /Pop /Live
Y
/Dance/ Techno /Classic and Soft.
Speaker
: To adjust the speaker on or off.
Y
SPDIF Type
: To adjust the SPDIF output: Off /Dolby
Y
Digital and PCM.
AVL : This will reduces the differences in volume level
Y
among broadcasters.
Audio Only : Press VOL+/ENTER button to confirm,
Y
the following display will appear on the screen:
Press VOL- to select OK, then press OK to confirm. The
TV screen will be black and no picture , but the sound
is still normal.
Press POWER button to exit Audio Only mode
OK
You can press POWER button to reveal the picture on
the screen.
SAP Broadcasts Setup
This TV can receive MTS stereo programs and SAP
button and /
VOL+ ENTER
to adjust the audio
/ button
VOL+ ENTER
to increase or
VOL+/-
/
VOL+ ENTER
to increase or
VOL+/-
Cancel
(Secondary Audio Program) that accompanies the stereo
program; if the station transmits an additional sound
signal as well as the original one.
When having selected SAP button on the remote
control, this TV can only receive the signal when the TV
station transmits the proper signals.
Mono sound is automatically received if the broadcast
is only in Mono; even though Stereo or SAP has been
selected.
Select Mono if you want to listen to mono sound during
stereo/SAP broadcasting.
Stereo or SAP can be received in a Analog channel.
A
Use the SAP button to select your desired MTS
mode in a analog signal. Each time you press the
to
SAP button, Mono, Stereoor SAP appear. If other
languages are available on the digital signal, select
them with the SAP button.
B
Press EXIT button to save and return to TV viewing.

Channel Menu Options

Channel menu will appear in main menu only in TV
mode.
A
Press MENU button and CH+/- button until the
following menu appears on the screen.
Video
Audio
Channel
Function
Lock
Channel
B
Press VOL+/ ENTER button to enter the menu
and CH+/- button to go up and down to select the
desired option.
C
VOL+/ ENTER button to confirm and VOL+/-
Press
button increase and decrease the level to adjust the
selected option to your preference.
D
Repeat step 2 and step 3 until desired audio quality
has been achieved.
Function
Tuner Mode
Y
Tuner Mode Antenna
Channel Scan
Channel Skip
Channel Labels
Time Shifting Mode On
CH+/-
Select EXIT
VOL+/-
:Press / button to select
VOL+ ENTER
Haier LED HDTV
Operation
Back
EN-12