Accessing Your Router After Installation - NETGEAR DGN2000 - Wireless Router Setup Manual

you can always access the router's user interface later to select a security option (see
"Accessing Your Router After Installation" on page
To ensure optimum performance of your high-speed wireless router, the
wireless adapter card for each computer in your network should support the
same technology as your router (see the online Reference Manual for more
information).
You are now connected to the Internet!
To set up additional wireless computers in your network for router access and to connect to the
Internet, see "Configuring Your Wireless Network" on page

Accessing Your Router After Installation

The Smart Wizard only appears when you first install the router or when the router is in its factory
default state (for example, if you have reset the router to its factory default settings). If you want to
change the settings after installing and configuring your router, you can click the desktop
shortcut—a preconfigured shortcut
router management interface.
router. After logging in, you can:
• Set up other wireless computers on your network, see
on page 21.
• Change settings and configure wireless security, see
page 21.
For advanced features that are not covered in this manual, see the Reference Manual on your
Resource CD. A link to the on-line Reference Manual also is available from the router interface.
1. The shortcut icon is installed on your desktop only when using the Smart Wizard installation method.
10
placed on your desktop at installation—to open the
1 Optionally, you can also open a browser window and log in to the
10).
21.
"Configuring Your Wireless Network"
"Specifying Wireless Settings" on
Installing Your Router Using the Smart Wizard