Table of Contents
Advertisement
Disable firewall. This disables the firewall in addition to disabling NAT. With the firewall
disabled, the protections usually provided to your network are disabled.
When no login is required, this field displays:
Router MAC Address. The Ethernet MAC address used by the wireless modem router on
the Internet port. Some ISPs register the MAC address of the network interface card in your
computer when your account is first opened. They will then accept traffic only from the MAC
address of that computer. This feature allows your wireless modem router to use your
computer's MAC address (this is also called cloning).
Use Default Address. Use the default MAC address.
Use Computer MAC Address. The wireless modem router will capture and use the MAC
address of the computer that you are now using. You must be using the one computer
that is allowed by the ISP.
Use This MAC Address. Enter the MAC address that you want to use.
DSL Settings
The DSL settings of your wireless modem router work fine for most ISPs. However, some
ISPs use a specific multiplexing method and virtual circuit number for the virtual path
identifier (VPI) and virtual channel identifier (VCI).
It is required that you use the Setup Wizard to select the correct
Note:
country for the default DSL settings to work.
If your ISP provided you with a multiplexing method or VPI/VCI number, enter the setting:
Select Setup > ADSL Settings to display the following screen:
1.
Figure 14. Enter the multiplexing or VPI/VCI setting
In the Multiplexing Method drop-down list, select LLC-based or VC-based.
2.
28 |
Chapter 2. Router Internet Setup
N150 Wireless ADSL2+ Modem Router DGN1000 User Manual
Advertisement
Table of Contents
