Table of Contents
Advertisement
N150 Wireless ADSL2+ Modem Router DGN1000 User Manual
Cable Your N150 Wireless Modem Router
The installation guide that came in the box has a cabling diagram on the first page. This
section walks you through the cabling procedure with detailed illustrations.
Put an ADSL microfilter between the phone line and the phone as shown here. The
1.
illustration shows a two-line ADSL microfilter with built-in splitter. The phone plugs into
the Phone jack as shown.
Figure 7. ADSL microfilter between phone line and phone
Use the included phone cable with RJ-11 jacks to connect the ADSL port (A) of the wireless
2.
modem router to the ADSL port (B) of the two-line ADSL microfilter.
A
Figure 8. Cable the modem router to the microfilter
CAUTION:
Incorrectly connecting a filter to your wireless modem router blocks your
DSL connection.
B
Chapter 1. Hardware Setup
| 15
Advertisement
Table of Contents
