Setting An Application File Type - 3Com WX5004 AC 4GE COMBO Installation Manual

0 -rw-
1 -rw-
2 -rw-
3 -rw-
253172 KB total (242996 KB free)
File system type of cfa0: FAT16

Setting an Application File Type

Using the BootWare menu
Enter 2 on the file control submenu, and the system displays the following information:
'M' = MAIN
==========================================================================
|NO. Size(B)
|1 10323352
|0 Exit
==========================================================================
Enter file No:
Enter the file sequence number at the prompt above. In this example, type 1 for file main.bin and press
Enter. The system prompts you to modify the file type:
Modify the file attribute:
================================================================================
|<1> +Main
|<2> -Main
|<3> +Backup
|<4> -Backup
|<0> Exit
================================================================================
Enter your choice(0-4)
Enter 1 for +Main (set to type M), 2 for –Main (remove the M type), 3 for +Backup (set to type B), or 4 for
–Backup (remove the B type). For details about the file types, refer to section "Application Files" on
page xx.
Using the CLI
# Change the type of file main.bin from type B to type M+B.
<H3C> boot-loader file main.bin main
This command will set the boot file. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot!
Now, the type of file main.bin is modified as M+B, and the file is specified as the main boot file to be
used at the next startup of the access controller. If a file of type M already exists on the access controller,
the type of the file will automatically change to N/A.
10323352 Sep 11 2053 02:17:14
33 Aug 28 2008 10:22:50
802 Aug 28 2008 10:22:50
76960 Aug 15 2008 15:58:02
'B' = BACKUP 'S' = SECURE
Time
Aug/20/2008 10:42:42 M
main.bin
system.xml
startup.cfg
vmetest.vme
'N/A' = NOT ASSIGNED
Type Name
cfa0:/main.bin
5-23
|
|
|
|
|
|
|
|