Components; Leds - 3Com WX5004 AC 4GE COMBO Installation Manual

Table 1-5 AC power input
Rated voltage range
Max input voltage range
Power consumption

Components

LEDs

The WX5004 provides LEDs on the front panel, as shown in Figure 1-4.
Figure 1-4 LEDs of the WX5004
(1) 1000 Mbps LED of gigabit Ethernet interface (1000M)
(2) Active LED of 10/100 Base-TX out-of-band management interface (ACT)
(3) Link LED of 10/100 Base-TX out-of-band management interface (LINK)
(4) System status LED (SYS)
(6) 10/100 Mbps LED of gigabit Ethernet interface (10/100M)
(7) LED of the expansion card (MOD)
Table 1-6 Description of LEDs
LEDs
LED of PSU 1
(green/yellow)
LED of PSU 2
(green/yellow)
Item
Silkscreen Status
Solid green
PWR1
Solid yellow
Off
Solid green
PWR2
Solid yellow
Off
Description
100 VAC to 240 VAC, 50 Hz or 60 Hz
90 VAC to 264 VAC, 47 Hz to 63 Hz
53.4 W to 67.7 W
(5) Status LED of PSU 1 (PWR1)
(8) Status LED of PSU 2 (PWR2)
PSU 1 supplies power to the system
normally.
PSU 1 is faulty.
No PSU is installed in the slot.
PSU 2 supplies power to the system
normally.
PSU 2 is faulty.
No PSU is installed in the slot.
1-4
Description