FUTABA 9VAP Instruction Manual page 33

Pcm 1024a pulse code modulation system digital proportional radio control
Table of Contents

Advertisement

5) Snap Roll direction can be selected during flight using the switches on the transmitter back.
6) AUTO Mode Setting:
a) Move the cursor to the MANUAL/AUTO position with the
b) Set the retract Gear (CH5) Switch in the "gear down" position. Press the
and "LOCK" will be displayed.
In the AUTO mode, the Snap Switch is inactivated when the landing gear is down (LOCK) and activated
when the landing gear is retracted (FREE).
c) To return to the MANUAL mode, press the
NOTE:
1) After setting the AUTO mode, always check to be certain that Snap Roll is only active when
the landing gear is UP.
2) SNAP ROLL mixing is not available in the BASIC mixing mode.
1. Snap roll not performed when
LOCK. Snap roll performed when
FREE.
cursor key.
program key.
[31]
program key. "AUTO"

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fp-9vapPcm 1024a

Table of Contents