FUTABA 9VAP Instruction Manual page 27

Combination of Mixing Circuits
Programmable mixing circuits can be combined
with each other, or with built-in mixing circuits
by two methods.
1) Setting a Mixing Circuit No. in the "mas"
position (MX1, MX2, MX3, or MX4).
2) and setting.
and Method
D
are displayed when the cursor is in
the "mas" position.
when the cursor is in the "slv" position.
1.
display
2. display
3. Displayed when cursor is in "mas"
position.
Indicates that Master channel is
"slaved" to another circuit.
Depending upon which channels are selected on
different mixing circuits, MX1, MX2, MX3, or
MX4 can be displayed in the "mas" position. The
slave channel of the mixing number displayed in
the "mas" column, then becomes a Master chan-
nel on the mixing circuit line that it is displayed
and the two circuits are connected.
2) To activate XON or YON mixing, press the
are displayed
Displayed
[25]
Mixing Number Method
or key. The
appear next to the appropriate channel on the
left side of the screen to indicate that
has been set.
for slave channel
will
character
or