Brake Mixing - FUTABA 3GR-2.4GHZ Instruction Manual

Use this mixing when the front and rear brakes must be adjusted independently, such
as in 1/5GP cars, etc. This mixing uses the 2nd channel to control the rear brakes and
the 3rd channel to control the front brakes.
Operation
- When braking, mixing is applied to 2nd channel and to 3rd channel.
- Mixing rate setting are possible.
- The set value of A.B.S. functions is reflected.
Calling the setup screen
(Initial screen)
Press "SEL" key to select the
desired function screen.
Brake mixing adjustment
(Preparation)
- Select setup item "BMXMD" and make the following adjustments.
1
(Function ON/OFF)
Set the function to the "ON" state by pressing the (+) or (-) button.
OFF: Function OFF
ON: Function ON
2
(Mixing amount adjustment)
Select setup item "BMX-RT" and use the (+) and (-) buttons to adjust the
mixing amount.
- Mixing amount can be adjusted within the 0~120% range.
3
When ending adjustment, return to the initial screen by pressing the (SEL)
button.
40
Brake Mixing / BMX
(Setup screen)
Setup items
BMX-RT: Mixing rate
BMX-MD: Function ON/OFF
Press "CH" key to select the next set-
up screen.
Mixing rate
0 ~ 100 ~ 120
Initial value: 100
Adjustment buttons
- Use the (+) and (-) buttons to make
adjustments.
- Press the (+) and (-) buttons simulta-
neously (approx. 1 sec) to return to the
initial screen.