Throttle Acceleration - FUTABA 3GR-2.4GHZ Instruction Manual

Gasoline engine cars have a small time lag at both the forward side and brake side
because a certain clearance is necessary at the linkage. Reducing this time lag at the
transmitter side provides the same sharp response as electric motor cars.
A slight clearance is required at the linkage, but the
throttle acceleration function acts to reduce the time
lag caused by this clearance.
Operation
- Operation near the throttle stick neutral position
becomes a sharp rise.
- The forward and brake sides can be set separately.
Set value
The standard value (100% point) of this setup effects the operation amount set by
throttle EPA function.
Calling the setup screen
(Initial screen)
Press "SEL" key to select the
desired function screen.
38
Throttle Acceleration / ACC
(Setup screen)
Setup items
ACC-FW : Forward side acceleration
amount
ACC-BK : Brake side acceleration
amount
Carburetor
Servo horn
Brake side
BRAKE
Press "CH" key to select the next set-
up screen.
Forward acceleration amount
0~100
Initial value: 0
Brake side acceleration amount
0~100
Initial value: 0
Adjustment buttons
- Use the (+) and (-) buttons to make
adjustments.
- Press the (+) and (-) buttons simulta-
neously (approx. 1 sec) to return to the
initial screen.
FORWARD