Calibrating The Dtu-710 - Wacom DTU-710 - MANUAL 2 User Manual

Customizing DTU-710 – The Basics

Calibrating the DTU-710

You will need to calibrate the pen display tablet in order to align the screen cursor
position with the position of the pen on the display screen. This is required to
adjust for parallax caused by the display screen cover glass. Set the DTU-710 in
its working position, then follow the procedure below.
1.
2.
Cross-hairs
14
From the WACOM TABLET Control Panel, select the CALIBRATION tab.
If you are working with multiple monitors, select the Monitor that corresponds to the
tablet's LCD display. (Only monitors that are set to one of the resolutions supported
by the DTU-710 will appear in the list.)
Click on the CALIBTRATE... button to display the monitor calibration screen.
Adjustment pattern
for phase and pitch.
See Adjusting Pitch
and Phase (VGA
Only) on page 26 for
details.