Using The Cable Lock Feature - Cisco AIR-AP1120B-A-K9 - Aironet 1100 Series Access Point Hardware Installation Manual

Chapter 3 Mounting Instructions

Using the Cable Lock Feature

When you mount the access point using the cubical partition mount or desktop holster, you can secure
the access point with your own security cable. Follow these steps to install the security cable.
Note Cisco recommends using a Kensington Notebook Microstar (model number 64068) to secure your access
point.
Loop the security cable around a nearby immovable object.
Step 1
Insert the key into the lock.
Step 2
Insert the lock into the security slot on the access point.
Step 3
Rotate the key right or left to secure the lock to the access point.
Step 4
Remove the key.
Step 5
A properly secured lock and cable look similar to
Figure 3-10
OL-4309-07
Kensington Lock
Cisco Aironet 1100 Series Access Point Hardware Installation Guide
Figure 3-10.

Using the Cable Lock Feature

3-11