Figure 5-31: Connection - Linksys WCG200 - Wireless-G Cable Gateway Wireless Router User Manual

Wireless-G Cable Gateway
Status
The Internet connection status information is displayed. This section indicates the System Up Time, Network
Access, WAN IP Address, Subnet Mask, Gateway IP Address, DNS server(s), WAN DHCP IP Address Lease, and
WAN DHCP IP Expiration.
System Up Time. This indicates how long the Gateway has been active.
Network Access. This indicates whether access to the network has been achieved.
WAN IP Address. This indicates the IP Address that is assigned to the Gateway.
Subnet Mask. The Subnet Mask of the Gateway is displayed here.
Gateway IP Address. The IP Address of the Gateway is shown here.
DNS Server(s). The IP address(es) of the DNS server(s) are displayed here.
WAN DHCP IP Address Lease. This indicates how long the lease is.
WAN DHCP IP Expires. This indicates when the lease expires.
Renew DHCP Lease. Click the Renew DHCP Lease button to replace your Gateway's current IP address with a
new IP address.
Connection
The cable connection information is displayed.
The Startup Procedure information displayed is Acquire Downstream Channel, Connectivity State, Boot State, and
Security.
The Downstream Channel information displayed is the Lock Status, Modulation, Channel ID, Provisioned Rate,
Symbol Rate, Downstream Power, and SNR.
The Upstream Channel information that is displayed is Lock Status, Modulation, Channel ID, Provisioned Rate,
Symbol Rate, and Upstream Power.
Chapter 5: Configuring the Wireless-G Cable Gateway
The Status Tab

Figure 5-31: Connection

41