Wireless-G Cable Gateway
Installing the USB Driver for Windows 2000
1. Start up your PC. Windows will notify you that it has detected new hardware. Insert the Setup CD into the CD-
ROM drive.
2. When the Welcome to the Found New Hardware Wizard screen appears to confirm that the device has been
identified by your PC, click Next.
3. Select Search for a suitable driver for my device (recommended) and click the Next button.
Chapter 4: Connecting the Wireless-G Cable Gateway
Wired USB Connection to a Computer
Figure 4-18: Found New Hardware
Figure 4-19: Welcome
Figure 4-20: Search for Driver
15