Figure 4-24: Found New Hardware; Figure 4-25: Welcome; Figure 4-26: Searching For Driver - Linksys WCG200 - Wireless-G Cable Gateway Wireless Router User Manual

Wireless-G Cable Gateway
Installing the USB Driver for Windows XP
1. Start up your PC. Windows will notify you that it has detected new hardware. Insert the Setup CD into the CD-
ROM drive.
2. When the Welcome to the Found New Hardware Wizard screen appears to confirm that the device has been
identified by your PC, click the Next button.
3. Windows will now search for the driver software.
Chapter 4: Connecting the Wireless-G Cable Gateway
Wired USB Connection to a Computer
Figure 4-24: Found New
Hardware

Figure 4-25: Welcome

Figure 4-26: Searching for Driver

17