Figure 5-28: Ping Test - Linksys WCG200 - Wireless-G Cable Gateway Wireless Router User Manual

Wireless-G Cable Gateway
To send the logs, click the E-mail Log button. To clear the log entries displayed on this screen, click the Clear
Log button.
When finished making your changes on this tab, click the Save Settings button to save these changes, or click
the Cancel Changes button to undo your changes.
Diagnostics Tab
Use this screen to run a ping test.
Ping Test
Ping Test Parameters
• Ping Target. Enter the IP Address that you want to ping in the field provided. This can be either a local (LAN) IP
or an Internet (WAN) IP address.
• Ping Size. Enter the size of the ping packets you want to use.
• Number of Pings. Enter the number of times that you want to ping.
• Ping Interval. Enter the ping interval in milliseconds.
• Ping Timeout. Enter the timeout period in milliseconds.
• Ping Result. The results of the ping test will be shown here.

Figure 5-28: Ping Test

Click the Start Test button to start the Ping Test. Click the Abort Test button to stop the test. Click the Refresh
button to refresh the screen. Click the Clear Results button to clear the screen.
Chapter 5: Configuring the Wireless-G Cable Gateway 39
The Administration Tab