Wds Mode - D-Link AirPremier DAP-2360 User Manual

Section 3 - Configuration
In WDS mode, the DAP-2360 wirelessly connects multiple networks, without functioning as a wireless AP.
Wireless Band: Select 2.4GHz from the drop-down menu.
Mode: WDS is selected from the drop-down menu.
Network Service Set Identifier (SSID) is the name
Name (SSID):
designated for a specific wireless local area
network (WLAN). The SSID's factory default
setting is dlink. The SSID can be easily changed
to connect to an existing wireless network or to
establish a new wireless network.
SSID Enable or Disable SSID visibility. Enabling this
Visibility: feature broadcasts the SSID across the network,
thus making it visible to all network users.
Auto Channel
Enabling this feature automatically selects
Selection: the channel that will provide the best wireless
performance. This feature is not supported in

WDS mode.

Channel:
All devices on the network must share the
same channel. To change the channel, use the
drop-down menu to make the desired selection.
Channel
Use the drop-down menu to choose 20 MHz or
Width: Auto 20/40 MHz.
Remote
Enter the MAC addresses of the APs on your
AP MAC
network that will serve as bridges to wirelessly
Address:
connect multiple networks.
D-Link DAP-2360 User Manual
WDS mode
21