Static Pool Setting - D-Link AirPremier DAP-2360 User Manual

Section 3 - Configuration
The DHCP address pool defines the range of IP addresses that can be assigned to stations on the network. A static
pool allows specific wireless stations to receive a fixed IP without time control.
Function Enable/
Dynamic Host Configuration Protocol
Disable:
(DHCP) assigns IP addresses to wireless
devices on the network. This protocol
simplifies network management and allows
new wireless devices to receive IP addresses
automatically without the need to manually
assign IP addresses. Select Enable to allow
the DAP-2360 to function as a DHCP server.
Assigned IP:
Use the Static Pool Settings to assign the
same IP address to a device every time you
start up. The IP addresses assigned in the
Static Pool list must NOT be in the same IP
range as the Dynamic Pool. After you have
assigned a static IP address to a device via
its MAC address, click Save; the device will
appear in the Assigned Static Pool at the
bottom of the screen. You can edit or delete
the device in this list.
Assigned MAC
Enter the MAC address of the device
Address:
requesting association here.
Subnet Mask:
Define the submask of the IP address specified in the "IP Assigned From" field.
D-Link DAP-2360 User Manual

Static Pool Setting

47