Wds With Ap Mode - D-Link AirPremier DAP-2360 User Manual

Section 3 - Configuration
In WDS with AP mode, the DAP-2360 wirelessly connects multiple networks while still functioning as a wireless AP.
Wireless Band:
Select 2.4GHz from the drop-down menu.
Mode: WDS with AP mode is selected from the drop-down
menu.
Network Name
Service Set Identifier (SSID) is the name designated
(SSID):
for a specific wireless local area network (WLAN). The
SSID's factory default setting is dlink. The SSID can
be easily changed to connect to an existing wireless
network or to establish a new wireless network.
SSID Visibility:
Enable or Disable SSID visibility. Enabling this feature
broadcasts the SSID across the network, thus making
it visible to all network users.
Auto Channel
Enabling this feature automatically selects the channel
Selection:
that will provide the best wireless performance. This
feature is not supported in WDS with AP mode. The
channel selection process only occurs when the AP
is booting up.
Channel:
To change the channel, use the drop-down menu
to make the desired selection. (Note: The wireless
adapters will automatically scan and match the
wireless settings.)
Channel Width:
Indicates whether the device is capable of 20MHz operation only or both 20MHz and 40MHz operation.
D-Link DAP-2360 User Manual

WDS with AP mode

19