D-Link AirPremier DAP-2360 User Manual page 32

Section 3 - Configuration
Check the Enable Priority box at the top of this window to enable. Select the priority from the drop-down menu.
Priority:
Select Enable or Disable.
WMM (Wi-Fi
Multimedia):
When you select Open System, toggle between Enable and Disable. If Enable is selected, the Key Type, Key Size, Key
Encryption:
Index (1~4), Key, and Confirm Keys must also be configured.
Select HEX or ASCII.
Key Type:
Select 64 Bits or 128 Bits.
Key Size:
Key Index (1-4): Select from the 1st to 4th key to be set as the active key.
Input up to four keys for encryption. You will select one of these keys in the Key Index drop-down menu.
Key:
When you select either WPA-Personal or WPA-Enterprise, you must also choose a WPA mode from the drop-down menu:
WPA Mode:
AUTO (WPA or WPA2), WPA2 Only, or WPA Only. WPA and WPA2 use different algorithms. AUTO (WPA or WPA2)
allows you to use both WPA and WPA2. In addition, you must configure Cipher Type and Group Key Update Interval.
Select Auto, AES, or TKIP from the drop-down menu.
Cipher Type:
Group Key Update
Select the interval during which the group key will be valid. The default value of 1800 seconds is recommended.
Interval:
PassPhrase: When you select WPA-Personal, please enter a PassPhrase in the corresponding field.
Confirm
When you select WPA-Personal, please re-enter the PassPhrase entered in the previous item in the corresponding field.
PassPhrase:
RADIUS Server: When you select WPA-Enterprise, enter the IP address of the RADIUS server. In addition, you must configure RADIUS
Port and RADIUS Secret.
RADIUS Port:
Enter the RADIUS port.
RADIUS Secret:
Enter the RADIUS secret.
D-Link DAP-2360 User Manual 32