Identify Your Camera On The Network; Assign A Local Ip Address For Your Camera - D-Link SECURICAM Network DCS-950 User Manual

DCS-950 User's Manual

1) Identify Your Camera on the Network

Once you are logged into the camera via a Web browser on your network PC, click on
the Advanced Tab, and select Video. Enter a unique Camera Name. These settings are
important if you are installing several cameras on your network.

2) Assign a Local IP Address for Your Camera

A Local IP Address is required to configure your camera and to view your camera within
your local (home) network.You may use the default camera IP Address of 192.168.0.20.
If you wish to use a different IP Address, be sure that the camera settings correspond
to your network settings. The Default Gateway will be the IP Address of your router's
Local IP Address (i.e.192.168.0.1 if you are using a D-Link router)
D-Link Systems, Inc.
Installing the DCS-950 Behind a Router
44