Camera Configuration - D-Link DCS-6620G Quick Install Manual

DCS-660G Install Guide
Double-click on the Installation
Wizard icon, which should have
been created on your desktop.
The software will search for cameras.
The Installation Wizard will now show
a MAC address of the DCS-6620G
and an IP Address (which may or may
not be correct depending on what you
have your DCS-6620G connected to).
If you have a DHCP* server on your
network, there will be a valid IP Address
displayed here. After a few seconds, the
"assigned" column will display yes,
indicating that the displayed IP Address
is now assigned to the camera.
*A DHCP server is a device that supplies IP Addresses to
its clients that are on the same network.
D-Link Systems, Inc.

Camera Configuration