D-Link SECURICAM Network DCS-950 User Manual page 25

DCS-950 User's Manual
Nightshot:
Brightness:
On-line User:
File Path:
Start Video
Recording:
D-Link Systems, Inc.
Logout:
Click to log out of the DCS-950. If you would like to view or
configure the camera, you will must log in again.
Select this if the camera is operating under low light conditions.
In this setting the DCS-950 will be able to view at 0.5 Lux.
There are 5 settings each for more brightness and less
brightness from 0. After selecting your setting, please wait a
few seconds for the camera to adjust accordingly.
The DCS-950 will be able to detect simultaneous users connected
to it and indicate the amount with a digital readout.
The DCS-950 is able to record video from the Web Browser
into a local hard drive of the PC that is viewing it. This path can
be specified (for example, c:\dcs950\myrecording).
Clicking this button will start recording video and audio
immediately to the file path specified above.
Using the Configuration Menu
25