D-Link DCS-950G User Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. IP Camera
  5. WIRELESS G DCS-950G
  6. User manual

D-Link DCS-950G User Manual

D-link wireless internet camera manual
Hide thumbs Also See for DCS-950G:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual

Advertisement

Table of Contents
loading

Related Manuals for D-Link DCS-950G

Summary of Contents for D-Link DCS-950G

  • Page 2: Table Of Contents

    Table of Contents DCS-950G User’s Manual Table Of Contents Package Contents ................5 Minimum System Requirements .............. 5 Introduction ..................6 Features and Benefits ................7 Hardware Overview ................8 Connections ....................... 8 LEDs ........................9 Hardware Installation ................ 10 Security ..................
  • Page 3 1) Identify Your Camera on the Network ............ 48 2) Assign a Local IP Address for Your Camera .......... 48 Assigning and Opening the HTTP Port on the DCS-950G ......... 49 3) Open the HTTP Port ................49 Router Setup and Installation ................50 Assigning and Opening Virtual Server Ports ............
  • Page 4 Table of Contents DCS-950G User’s Manual IPView Lite Icon Description ................76 Context Sensitive Menu ..................77 Uninstall IPView Application ..............78 Frequently Asked Questions ..............80 Internet Camera Features ................. 80 Internet Camera Installation ................82 How to Ping Your IP Address ................84 Time Zone Table ................

  • Page 5: Package Contents

    Package Contents DCS-950G User’s Manual Package Contents D-Link SECURICAM Network DCS-950G Internet Camera Cat5 Ethernet Cable 802.11G Antenna Power Adapter (5.0V, 2.5A) Camera Stand with Mounting Bracket and Screws CD-ROM with Software and Manual Quick Installation Guide Note: Using a power supply with a different voltage than the one included with your product will cause damage and void the warranty for this product.

  • Page 6: Introduction

    Unlike a PC Camera, the DCS-950G is a stand-alone system with a built-in CPU and Web server that transmits high quality video images for monitoring. The DCS-950G can be accessed remotely, and controlled from any PC/Notebook over the Intranet or Internet via a Web browser.

  • Page 7: Features And Benefits

    Web browser to a local hard drive without installing any software, making it convenient to instantly capture any moment from a remote location. Record Directly to a NAS: The DCS-950G allows you to record directly to a local network area storage device without the use of a dedicated PC for storing recorded video.

  • Page 8: Hardware Overview

    192.168.0.20. DC Power Connector Ethernet Cable Connector The DC power input connector The DCS-950G features an RJ-45 is labeled DC 5V with a single connector for connections to 10Base- jack socket to supply power to T Ethernet cabling or 100Base-TX Fast the DCS-950G.

  • Page 9: Leds

    DCS-950G’s lens. It is located below the Power LED. Steady green confirms a good connection to the LAN. Depending on the data traffic, the LED will begin to flash to indicate that the DCS-950G is receiving/transceiving from/to the LAN network. D-Link Systems, Inc.

  • Page 10: Hardware Installation

    Attach the external power supply to the DC power input connector located on the rear panel of the DCS-950G and connect it to your local power supply. Note: Power source is confirmed when the orange LED Power Indicator located to the right of the lens on the DCS-950G is illuminated.
  • Page 11 Hardware Installation DCS-950G User’s Manual Attach the Stand and Mounting Bracket If you would like to mount the camera on a wall, you must first attach the stand and mounting bracket. First, attach the mounting bracket to the base of the camera using the screws provided.

  • Page 12: Security

    DCS-950G they will be allowed to view the images transmitted by the DCS-950G. Note: When the DCS-950G is used for the first time, it is highly recommended that the Administrator set the Admin ID and Admin Password to constrain user access to the DCS-950G since the Default settings for the Admin ID and Admin Password are both “admin.”...

  • Page 13: Using The Setup Wizard

    Using the Setup Wizard Follow the simple steps below to run the Setup Wizard to guide you quickly through the installation process. Insert the D-Link DCS-950G CD into your CD-ROM drive. Click Install Software. Click Installation Wizard. D-Link Systems, Inc.
  • Page 14 Using the Setup Wizard DCS-950G User’s Manual Click Next. Click Yes. D-Link Systems, Inc.
  • Page 15 Using the Setup Wizard DCS-950G User’s Manual Click Next. Click Finish. D-Link Systems, Inc.
  • Page 16 Using the Setup Wizard DCS-950G User’s Manual Select a language and click OK. Click Next. D-Link Systems, Inc.
  • Page 17 Using the Setup Wizard DCS-950G User’s Manual Click I Agree. Click Next. D-Link Systems, Inc.
  • Page 18 Using the Setup Wizard DCS-950G User’s Manual Click Install. Click Next. D-Link Systems, Inc.
  • Page 19 Using the Setup Wizard DCS-950G User’s Manual Click Finish. To run the Setup Wizard, click on Start->Programs->DCS-950 Series Setup Wizard. Your camera’s default IP Address will be displayed on the screen. Click Wizard to begin. D-Link Systems, Inc.
  • Page 20 Using the Setup Wizard DCS-950G User’s Manual By default, the Admin ID and Password are “admin” (lower case). Enter this in both fields. To change the Admin Password, select the Change box and enter a New Password. Click Next. The IP Address, Subnet Mask of your camera, Gateway, and DNS addresses must correspond with your network settings for you to access the camera.
  • Page 21 Using the Setup Wizard DCS-950G User’s Manual The Connection Mode depends on how your camera is connected to your network. Click Infrastructure for use with a router or Adhoc for a peer-to-peer connection. The Network Name, Wireless Channel, Security Mode, and Authentication type MUST correspond with your wireless network settings for the camera to work.
  • Page 22 Using the Setup Wizard DCS-950G User’s Manual If you need to make any changes, click Back to modify your camera settings. Otherwise, click Restart to save and apply your settings. This may take a few minutes Your setup is now complete! Wait until the Link LED on the camera begins to flash.
  • Page 23 Using the Setup Wizard DCS-950G User’s Manual Your camera is now displayed in the Web browser. D-Link Systems, Inc.

  • Page 24: Using The Configuration Menu

    If you would like to open the configuration page from a Web Browser, enter the IP address that you assigned to your DCS-950G. Home Screen When you click on “Link”, the DCS-950G Home screen will appear. Use the following displayed options to set up and view your Internet Camera: Wizard...
  • Page 25 DCS-950G User’s Manual Home Screen Wizard: This page is used to set up the DCS-950G using the Wizard to walk you through setting up the camera for your network. Setup: This will allow you to change the configuration settings of the DCS-950G.

  • Page 26: D-Link Systems, Inc

    Using the Configuration Menu DCS-950G User’s Manual Logout: Click to log out of the DCS-950G. If you would like to view or configure the camera, you will must log in again. Select this if the camera is operating under low light conditions.

  • Page 27: Configuration

    DCS-950G User’s Manual Configuration Click on Setup from the Home screen to access the settings required for the DCS-950G. There will be several options in the Configuration page to choose from to setup your DCS-950G and they are as follows:...

  • Page 28: Advanced

    Using the Configuration Menu DCS-950G User’s Manual Advanced The Advanced tab provides the following configuration options: Video, User, LAN, PPPoE, DDNS, Wireless, and Site Survey. Video Advanced > Video Default Level Quality: Select the viewing video quality. By default the quality is set to High.
  • Page 29 Using the Configuration Menu DCS-950G User’s Manual MPEG Sequence I-frame and P-frame mode and I-frame and BP-frames are Mode: selectable. This determines how many repeated P frames will appear after one I frame. A large “Key frame interval” can reduce the bit rate, but can cause image to be corrupted longer if there is packet loss while transmitting.

  • Page 30: User

    Username. The maximum password length is 16 characters (Printable ASCII). The User List displays all the user names that have access to User List: the DCS-950G. To delete a user, click on the corresponding trash can icon. D-Link Systems, Inc.

  • Page 31: Lan

    Using the Configuration Menu DCS-950G User’s Manual Advanced > LAN If you are using a LAN connection, select either Static IP or LAN Settings: DHCP Client. If manually assigning a Static IP, enter your IP Address, IP Subnet Mask, Gateway IP Address, and DNS into the fields provided.

  • Page 32: Pppoe

    Using the Configuration Menu DCS-950G User’s Manual PPPoE Advanced > PPPoE PPPoE: If you are using a PPPoE connection, click the Yes button and enter the User Name and Password for your PPPoE account. D-Link Systems, Inc.

  • Page 33: Ddns

    IP address and that address is used only for the duration of that specific connection. With the DCS-950G, you can set up your DDNS service and the DCS-950G will automatically update your DDNS server every time it receives a different IP address. Depending on the service, this update may take a few hours.

  • Page 34: Wireless

    Using the Configuration Menu DCS-950G User’s Manual Wireless Advanced > Wireless Wireless: Click to enable or disable your wireless settings. Connection Mode: Select one of the two options: Infrastructure - connecting the WLAN using an Access Point such as the DWL-2100AP or a DI-624 wireless router. (The default setting.)
  • Page 35 Security Mode: Select between None, WEP, or WPA_PSK. None means that no encryption will be set on the DCS-950G. WEP (Wired Equivalent Privacy) will set encryption from 64 to 128 bits. If the security mode is set to WPA-PSK (Wi-Fi Protected Access with pre-shared key), the pre-shared key field must be filled.

  • Page 36: Site Survey

    Site Survey: This page will allow you to display all the wireless networks detected by the DCS-950G. You can select a network to connect to and refresh the list of available networks. You must enable your wireless settings in order to activate the Site Survey feature.

  • Page 37: Tools

    Using the Configuration Menu DCS-950G User’s Manual Tools The Tools tab provides the following configuration options: Admin, System, Default, Firmware, Recording, Trigger, Motion Detection, and Port. Admin Tools > Admin User Name: Enter the administrator user name (admin). Password: Enter the current password.

  • Page 38: System

    Using the Configuration Menu DCS-950G User’s Manual System Tools > System Time: The current camera time. Date: The current camera date. Default NTP Enter the IP address or domain name of the time server. Leaving Server: the box blank will connect the camera to default time servers.

  • Page 39: Default

    Using the Configuration Menu DCS-950G User’s Manual Default Tools > Default Restart: Click the Restart button to restart the camera system. Default: Click the Restore button to restore factory default settings. This means that any changes made will be lost and the system will be reset to the initial status when shipped from the factory.

  • Page 40: Firmware

    Firmware Tools > Firmware You can upgrade the firmware by using this tool. First, check the D-Link support site for firmware updates at http://support.dlink.com. Make sure that the firmware you want to use is saved on the local hard drive of your computer. Click on Browse to search the local hard drive for the firmware that you downloaded from the D-Link Website to be used for the update.

  • Page 41: Recording

    Using the Configuration Menu DCS-950G User’s Manual Recording Tools > Recording Upload Image to Network Share Clicking on the box will enable uploading of images to your Folder: network storage device. Login Method: Select either Anonymous or Account. By selecting Anonymous, no user name or password is required.

  • Page 42: Trigger

    Using the Configuration Menu DCS-950G User’s Manual Trigger Tools > Trigger SMTP Login Name: The user name used to log into your e-mail account (e.g. jdoe or jdoe@yourisp.com depending on your ISP). The password used to log into your e-mail account. (The SMTP Password: password will appear as dots instead of entered characters.)

  • Page 43: Motion Detection

    Using the Configuration Menu DCS-950G User’s Manual Motion Detection Increasing the time set here will avoid false alarms. This option Skip Time: allows you to set the amount of time between motion detection events before the next recording will start.

  • Page 44: Port

    Using the Configuration Menu DCS-950G User’s Manual Saves the related settings of that window. Save: Click to open the Motion Screen Display. The MSD window Open MSD: allows you to monitor the amount of motion detected in each motion window. The graphic bars will increase or decrease depending on the image variation.

  • Page 45: Status

    Using the Configuration Menu DCS-950G User’s Manual Note: You MUST also set up your router/gateway for Port Mapping; this will enable remote viewing of your camera via the Internet. Please refer to your router’s instruction manual on how to open up ports. For additional help on configuring your camera to work with your router, please refer to the next section on setting up your camera for use with a router.

  • Page 46: Help

    Using the Configuration Menu DCS-950G User’s Manual The Device Info screen lists the following important settings that are currently set for the DCS-950G. IP Address IP Subnet Mask Gateway IP Address SSID Wireless IP Address Channel PPPoE Server Name Firmware Version...

  • Page 47: Installing The Dcs-950G Behind A Router

    Installing the DCS-950G Behind a Router DCS-950G User’s Manual Installing the DCS-950G Behind a Router Single Camera Installation If you are installing a single camera on your network the installation is an easy 4–step procedure: 1) Identify Your Camera on the Network 2) Assign a Local IP Address for Your Camera 3) Determine Your Router’s WAN IP Address (Enable Remote Viewing)

  • Page 48: Identify Your Camera On The Network

    If you wish to use a different IP Address, be sure that the camera settings correspond to your network settings. The Default Gateway will be the IP Address of your router’s Local IP Address (i.e.192.168.0.1 if you are using a D-Link router) D-Link Systems, Inc.

  • Page 49: Assigning And Opening The Http Port On The Dcs-950G

    Installing the DCS-950G Behind a Router DCS-950G User’s Manual Assigning and Opening the HTTP Port on the DCS-950G (For Installing Multiple Cameras) Opening ports will allow users to view the camera via the Internet. The ports that are opened must be unique for each camera in order to successfully view the images remotely.

  • Page 50: Router Setup And Installation

    Router Setup and Installation The following steps generally apply to any router that you have on your network. The D-Link DI-624 is used as an example to clarify the configuration process. Your WAN Ip Address information will be listed on following window.

  • Page 51: Assigning And Opening Virtual Server Ports

    Installing the DCS-950G Behind a Router DCS-950G User’s Manual Assigning and Opening Virtual Server Ports 4) Open Virtual Server Ports To Enable Remote Image Viewing The Virtual Server Ports of your router must be opened for remote access to your camera.

  • Page 52: Viewing Your Camera

    Installing the DCS-950G Behind a Router DCS-950G User’s Manual Viewing Your Camera After all settings have been entered correctly, a user inside or outside your network will have access to the camera through a standard Web browser. To access from the Internet, simply type in the IP Address of the router given to you by your ISP, a colon, and the port number that you gave your camera.

  • Page 53: Ipview Lite Application Installation

    IPView Lite software is included for administrators to manage up to 4 DCS-950Gs remotely, record to hard drive, and configure advanced settings for the DCS-950G. IPView Lite is a complete software management tool for the DCS-950G and includes all configurable settings available in the Web configuration utility. Insert the CD-ROM into the CD-ROM drive.
  • Page 54 IPView Lite Application Installation DCS-950G User’s Manual Click Next. Click Yes. Click Next. D-Link Systems, Inc.
  • Page 55 IPView Lite Application Installation DCS-950G User’s Manual Click Next. If your sound card or video card has not passed Windows Logo testing, this window will appear. Click Continue Anyway. If there are previously installed target files that are newer than the source files, do NOT overwrite them.
  • Page 56 IPView Lite Application Installation DCS-950G User’s Manual Click Finish. After successfully installing the IPView Lite, the application program for the DCS-950G is automatically installed to \Programs\IPViewLite Directory. To start running the IPView Lite click on Windows Start > Programs > IPViewLite >...
  • Page 57 IPView Lite Application Installation DCS-950G User’s Manual Once logged in, the IPView Lite application is executed and the IPView Lite interface will appear in the default List View format: D-Link Systems, Inc.

  • Page 58: Ipview Lite

    IPView Lite DCS-950G User’s Manual IPView Lite This section describes the operation of the IPView Lite application User Interface with detailed procedures for using the application. IPView Lite allows you to manage your cameras by enabling you to search, configure and preview all the DCS-950Gs from one location.

  • Page 59: How To Add A Camera

    68.2.34.156:800, where 68.2.34.156 is your router’s WAN IP and :800 is the port that your camera is using. For more detailed information, please refer to the section titled “Installing the DCS-950G Behind a Router Configuration” on page 47. D-Link Systems, Inc.
  • Page 60 IPView Lite DCS-950G User’s Manual Click on Search. IPView Lite will detect and search for all the available cameras that are installed on the local area network. Highlight the camera you wish to add and click on Add. The Add Camera dialog box will appear once again with the IP Address entered.

  • Page 61: How To Delete A Camera

    IPView Lite DCS-950G User’s Manual How to Delete a Camera To delete a camera you must highlight the camera you wish to delete from the IPView Lite list view format. From the menu bar select Camera > Delete. A Delete Camera dialog box will appear.

  • Page 62: How To Change The Ip Address

    IPView Lite DCS-950G User’s Manual How to Change the IP Address To change an IP Address for a camera, select Camera > Add. An Add Camera dialog box will appear (see below). Click on Browse. The Browse Camera dialog box will appear with a blank screen (see below).

  • Page 63: How To Format The Camera View

    IPView Lite DCS-950G User’s Manual Highlight the camera you wish to change and click Change IP. If you have already changed the administrator user ID and password, you will be prompted to enter your admin ID and password before IPView Lite will allow you to change the IP Address for the DCS-950G.

  • Page 64: How To Rotate The Video View

    IPView Lite DCS-950G User’s Manual The icon on the upper left corner of the screen will appear with the camera number that is being displayed. To return to the IPView Lite list view , click on the icon located on the upper left corner of the screen and a case sensitive menu will appear.

  • Page 65: How To Take A Snap-Shot With The Camera

    IPView Lite DCS-950G User’s Manual How to take a Snap-Shot with the Camera To take a snap shot with the camera, you must highlight the camera you wish to use from the IPView Lite list view format. From the menu bar select Camera > Snap shot. A Save Image dialog box will appear for you to save the snap shot picture.

  • Page 66: Camera Property Settings

    DCS-950G User’s Manual Camera Property Settings Once you have completed the initial configuration of the DCS-950G using the Web- based interface, you can review or change your configuration using either the Web- based configuration utility or the Property Settings in the DCS-950G IPView Lite.

  • Page 67: Recording

    The Recording tab provides options for manual recording, schedule recording, or motion trigger recording. Manual Recording If the Manual Recording option is chosen, you must manually start recording in the List view of the DCS-950G in the Menu Bar or by clicking on the Record Icon. D-Link Systems, Inc.

  • Page 68: Scheduled Recording

    IPView Lite DCS-950G User’s Manual Scheduled Recording Select Schedule Recording to record based on specific times and dates. Click Schedule Setting to set the time and date for recording your files. Select By Date and enter in the dates, Start, and Stop Times. The camera will start to record according to the specified date and time period entered.

  • Page 69: Motion Trigger Recording

    When this option is selected and the camera detects motion within the range of the viewing window, recording will be triggered. Recording will continue until no motion is detected. Click on Sensitivity Setting to set the sensitivity levels for the DCS-950G. D-Link Systems, Inc.

  • Page 70: Menu Bar

    IPView Lite DCS-950G User’s Manual Menu Bar The menu bar makes it easier to navigate IPView Lite. All Management functions can be accessed from the menu bar. File New : Opens a new camera list. Cameras must then be added to the list for configuration.

  • Page 71: View

    IPView Lite DCS-950G User’s Manual View View on the menu bar provides users with management capabilities for Columns, List, Camera and Refresh. You can view the Camera in 1 Camera or 4 Camera mode. The View menu bar is pictured below.

  • Page 72: List View

    IPView Lite DCS-950G User’s Manual List View You can view the format in List view. The List viewing format allows easy management and control of each camera. All the cameras and their properties, such as the camera name, IP Address, user name, and location, will be displayed in the list view.

  • Page 73: Camera

    IPView Lite DCS-950G User’s Manual Camera Camera on the menu bar provides options to manage the camera. Add up to 4 additional Cameras for viewing. The Camera menu also allows you to Delete a camera, manage the Property, Enable real-time video capture, or take a Snap shot image.

  • Page 74: Account

    IPView Lite DCS-950G User’s Manual Account The account menu is for administrators to change user name and password. System Configuration This menu allows you to set overwrite options to overwrite old recorded files with new recorded files. Check the Load Last Configuration When Program Starts to load all your configured settings each time you run IPView Lite.

  • Page 75: About

    IPView Lite DCS-950G User’s Manual In order to allow old video files to be overwritten and replaced by new recorded files, place a check mark in the Recycle Box and click on By HDD Reserved Space or By Time. The Single HDD Reserved Space field refers to the amount of space left on your drive before overwrite takes place.

  • Page 76: Ipview Lite Icon Description

    IPView Lite DCS-950G User’s Manual IPView Lite Icon Description Open a new file. The hot key is Ctrl+N. Open an existing file. The hot key is Ctrl+O. Save a file. The hot key is Ctrl+S. List view format. The hot key is Ctrl+F1.

  • Page 77: Context Sensitive Menu

    IPView Lite DCS-950G User’s Manual Context Sensitive Menu In List View format, highlight a camera and right-click to bring up a context sensitive menu for features such as Add, Delete, Property, Enable, and Snap shot and Start/ Stop recordings. In View mode format click on the icon located on the upper left corner of the screen and a case sensitive menu will appear (see below).

  • Page 78: Uninstall Ipview Application

    Uninstall IPView Application DCS-950G User’s Manual Uninstall IPView Application Click on windows Start Menu > Programs > IPView > Uninstall IPView. A new prompt screen will be displayed like the one below confirming the removal. Choose the option that you want and click Next to continue the process or click on Cancel to reject the uninstall process.
  • Page 79 Uninstall IPView Application DCS-950G User’s Manual The InstallShield Wizard prompt will appear. Click Finish to complete the uninstallation procedure. D-Link Systems, Inc.

  • Page 80: Frequently Asked Questions

    Intranet or Internet via a Web browser. 2 What is the maximum number of users that can be allowed to access DCS-950G simultaneously? The maximum number of users that can log onto the Internet Camera at the same time is 8. Please keep in mind the overall performance of the transmission speed will slow down when multiple users are logged on.
  • Page 81 No, the Internet Camera is used only on Ethernet and Fast Ethernet network or supported by wireless transmission. The D-Link DSB-C110, DSB-C310 can be used as a PC Camera (Webcam). 8 Can the Internet Camera be connected on the network if it consists of only private IP Addresses? Yes, the Internet Camera can be connected to a LAN with private IP Addresses.

  • Page 82: Internet Camera Installation

    Frequently Asked Questions DCS-950G User’s Manual Other possible problems might be due to the network cable. Try replacing your network cable. Test the network interface of the product by connecting a local computer directly to the unit, utilizing a standard Crossover Cable, and run the PING utility. If the problem is not solved, the Internet Camera might be faulty.
  • Page 83 Frequently Asked Questions DCS-950G User’s Manual the light signals and changes it into a digital format so your computer can present it into an image that you are familiar with) has become overloaded when it has been exposed to bright lights such as direct exposure to sunlight or halogen lights. Reposition the Internet Camera into a more shaded area immediately as prolonged exposure to bright lights will damage the CMOS sensor.

  • Page 84: How To Ping Your Ip Address

    How to Ping Your IP Address DCS-950G User’s Manual How to Ping Your IP Address The PING (Packet Internet Groper) command can determine whether a specific IP Address is accessible by sending a packet to the specific address and waiting for a reply.
  • Page 85 How to Ping Your IP Address DCS-950G User’s Manual If you fail to connect to your camera you will see the following: Check to see if you have entered your camera’s IP Address correctly or reassign your camera’s IP Address.

  • Page 86: Time Zone Table

    Time Zone Table DCS-950G User’s Manual Time Zone Table GMT stands for Greenwich Mean Time, which is the global time that all time zones are measured from. D-Link Systems, Inc.
  • Page 87 Time Zone Table DCS-950G User’s Manual D-Link Systems, Inc.

  • Page 88: Adjusting The Camera Focus

    Adjusting the Camera Focus DCS-950G User’s Manual Adjusting the Camera Focus To help you get the best image quality, keep in mind that while adjusting the DCS-950G focus you can preview the image quality from your Web browser. Camera Lens Adjust by turning clockwise or counter-clockwise.

  • Page 89: Technical Specifications

    Technical Specifications DCS-950G User’s Manual Technical Specifications Video specification Resolution: 640 x 480 pixel Sensor: 1/4" color CMOS sensor Gain control: Automatic Exposure: Automatic White Balance: Automatic Shutter: Electronics 1/60 ~ 1/15000 sec Minimum Illumination: 0.5lux@f1.8, 3000K color Focal Length: 6.0 mm...
  • Page 90 Technical Specifications DCS-950G User’s Manual Communication Support Communication: 10/100Mbps Ethernet and Fast Ethernet only 2.4 802.11G Wireless 54Mbps Communication protocol: HTTP, TCP/IP, UDP, ARP, ICMP, BOOTP, RARP, DHCP, PPPoE Web Configuration Requirements: Internet Explorer 6.0 or above CPU: Pentium II, 266 MHz or above...

  • Page 91: Contacting Technical Support

    Contacting Technical Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our web site, or by phone.

  • Page 92: Warranty

    D-Link’s sole obligation shall be to repair or replace the defective Hardware during the Warranty Period at no charge to the original owner or to refund at D-Link’s sole discretion. Such repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement Hardware need not be new or have an identical make, model or part.
  • Page 93 Products shall be fully insured by the customer. D-Link will not be held responsible for any packages that are lost in transit to D-Link. The repaired or replaced packages will be shipped to the customer via UPS Ground or any common carrier selected by D-Link, with shipping charges prepaid. Expedited shipping is available if shipping charges are prepaid by the customer and upon request.
  • Page 94 THE LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE RISK AS TO THE QUALITY, SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT. Limitation of Liability: TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE...
  • Page 95 Consult the dealer or an experienced radio/TV technician for help. For detailed warranty outside the United States, please contact corresponding local D-Link office. FCC Caution: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment;...

  • Page 96: Registration

    Registration DCS-950G User’s Manual Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. 11/30/04 D-Link Systems, Inc.

This manual is also suitable for:

Securicam network dcs-950g

Table of Contents